Can the wooden floor bulge be restored? What causes the blistering?

Hollowing occurs in ceramic tiles, and bulging occurs in wooden floors. This is a relatively easy occurrence on rainy days. What causes blistering? Can wooden floors be restored ? Don't worry, below The Xiaobian of this website analyzes and analyzes for everyone.

1. Can the wooden floor bulging be restored?

Wooden floor bulging can be restored ? Wooden floor foaming is mainly divided into two phenomena, one is the blistering on the edge, a kind of board drum kit, this time there are four ways to solve this problem:

a, open and vent dry

When the wooden floor is bulging, the arched wooden block and the surrounding floor can be removed, so after the normal time of ventilation and air diffusion, the arching phenomenon can be relieved. If the area is relatively large, the floor and the keel will be waited. Then lay back and put a small gap when paving the floor, giving the floor a space where the floor swells and shrinks.

b, clear expansion joint debris

Can the wooden floor bulge be restored ? If the gap between the wooden floors is blocked by the resulting blistering of the floor, cleaning the contents of the expansion joints can be restored.

c, grinding repair

If the blistering area of ​​the wood floor is very small, if the diameter is less than 2cm, it can be directly repaired in the blistering position, but the color texture should be consistent with the surrounding, and this method is more suitable for solid wood composite flooring.

d, replace the wood floor

Wooden floor bulging can restore it ? The most stupid, most expensive, most effective way is to replace the new floor, if it is to strengthen the floor, then we must use this approach, remove the bulging deformation of the wooden floor, and then use the cement Lay out the floor and replace it with a new one. If your floor is still under warranty, it can be disposed of afterwards, without spending more money.

2. What caused the foaming

a, caused by moisture

If you do not clean the floor before installing the floor, resulting in uneven or sandy ground, after the floor is put into use, after a long stampede, the damp proof film and the balance layer on the back of the floor are easily damaged, so that the floor Moisture can cause floors to bulge.

b. Caused by improper handling of moisture prevention measures

When the wooden floor is installed, if no moisture prevention measures are taken, or if it is not treated properly, it will cause blistering of the wooden floor. Therefore, when installing the wooden floor, the moisture-proof membrane connection should be made of waterproof tape.

c. Caused by improper use of wooden floor

Many wooden floor bulges are caused by water in the gaps between the wooden floors, such as heating water or water soaked in the water for a long time. This situation is due to improper use and maintenance, and the moisture prevention measures are not done well.

Editor's Note: The above is about whether the wooden floor bulging can be restored and what causes the blistering. When the wooden floor appears bulging bags, you don't need to worry too much. There are many ways to solve it. If you think you can't solve it, you can choose a professional. Repair services, many businesses are good after-sales service.