The cabinet of the explosion-proof distribution box is made of aluminum alloy, high-quality cold-rolled steel plate or stainless steel, etc., and is carefully planned and manufactured according to customer requirements. The structure is perfectly exquisite workmanship, and the groove-shaped box edge structure is provided with a polyurethane foam sealing waterproof glue strip inside the door and can fit tightly with the side of the tank box. Many users do not know how to install the explosion-proof distribution box. I will introduce the installation process and precautions of an explosion-proof distribution box.
First and foremost, it is necessary for operators to wear anti-static clothing and other protective measures before installing explosion-proof goods. Secondly, it is not good to check the attachment of the device tool. The first is safety. After the power is turned on, the circuit of the explosion-proof power distribution box is checked to see if it is powered on. Normally, we think that it is power-on. Direct contact with the body may be direct contact with the body. When the explosion-proof distribution box is in operation, it must not be disassembled and disassembled. It is necessary to disconnect the power supply first, and then use a pencil test to verify that there is no electricity, so that disassembly and maintenance operations can be performed. Explosion-proof distribution box has certain advantages in the market, the protection level can reach IP65, and the choice of high-quality cold-rolled steel is the raw material, and the use of materials is enough, the production of the operating table is removable.
Secondly, the interior of the explosion-proof distribution box is planned to have 3 pieces of movable device boards, which will make your installation equipment more concise.
Explosion-proof distribution box box on both sides of the vent outside the waterproof cover, useful anti-water, dust, ventilation and other functions.
There are cooling holes on both sides and on the top to ensure outstanding dispersion and simple operation. Appearance through strict pre-treatment electrostatic temperature spray treatment, high rust.
However, due to the long-term use of the explosion-proof distribution box, the explosion-proof doors of the explosion-proof distribution boxes of some of the operating units showed a situation in which the lid and the box were not aligned. Originally, regardless of stainless steel materials, steel plate materials, and plastic materials, these materials have their own memory. If external forces are applied to them for a long period of time during use, the explosion-proof doors may be deformed. How can they be restored? The method is as follows: Firstly, shut down all the power equipment connected by the distribution box, and remove the outside line of this explosion-proof power distribution box. Remove the circuit in full, mark the corresponding position, and wrap the exposed wires with insulating tape. Then turn off the explosion-proof door that shows deformation, and see if the deformation status of the explosion-proof door of the distribution box is serious. If the deformation direction can be corrected by using some tools, correct it yourself. If it cannot be corrected, send it back to the production unit. , let it be corrected.
The above is the explosion-proof distribution box installation process and precautions, if you have any questions about this issue, you can inquire.
Potassium Sulfate
Potassium Sulfate,Sodium Phosphate Dibasic,Dibasic Sodium Phosphate,Potassium Sulfate In Food
Shaanxi United Xingchuang International Co., Ltd. , https://www.lxcgj.com