Foil-Scrim Tape, Foil Tape, Insulation Material, Cnstruction Material

Features:
Aluminum with Fiberglass Scrim backing provides excellent reflection of both heat and light.
High performance adhesive with moderate adhesion offers good sealing and bonding on Foil-Scrim Facing joints and seams in HVAC ductwork application.
Good aging resistance both indoors and outdoors.
Low moisture vapor transmission rate offers excellent sealing and patching performance.
Service temperature: Water Acrylic:-10 to 65ºC (+14 to +149ºF);
                                Rubber Resin: -20 to +80ºC (-4 to +176ºF);
                                Solvent Acrylic: -30 to +120ºC (-22 to +248ºF).

Backing Thickness: 100micron, Total Thickness: 130micron.

Typical Applications: HVAC industry for joining and sealing Foil-Scrim Facing laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

Product Forms & Size Available
Cut Roll: 48mm / 50mm (2") / 60mm / 63mm (2.5") / 72mm / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mmx45 / 50m                    Jumbo Roll: 1200mmx750m/800m

Important Note
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%;Width: ±3mm;Length: Cut Roll:±0.3m,Jumbo Roll:±0.5%
Storage & Shelf Life: 12 months when stored at 21ºC(70ºF)/50% relative humidity out of direct sunlight.
Surface Preparation: It is essential, as with all pressure sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants
Product Use: It is essential that the user evaluate the DeYou product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on DeYou products between +10~+40ºC(+50 ~ 105ºF).

Features:
Aluminum with Fiberglass Scrim backing provides excellent reflection of both heat and light.
High performance adhesive with moderate adhesion offers good sealing and bonding on Foil-Scrim Facing joints and seams in HVAC ductwork application.
Good aging resistance both indoors and outdoors.
Low moisture vapor transmission rate offers excellent sealing and patching performance.
Service temperature: Water Acrylic:-10 to 65ºC (+14 to +149ºF);
                                Rubber Resin: -20 to +80ºC (-4 to +176ºF);
                                Solvent Acrylic: -30 to +120ºC (-22 to +248ºF).

Backing Thickness: 100micron, Total Thickness: 130micron.

Typical Applications: HVAC industry for joining and sealing Foil-Scrim Facing laminated fiberglass blanket / duct board / pipe section joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

Product Forms & Size Available
Cut Roll: 48mm / 50mm (2") / 60mm / 63mm (2.5") / 72mm / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mmx45 / 50m                    Jumbo Roll: 1200mmx750m/800m

Important Note
1. The data above are typical values only, and should not be used for specifications purpose.
2. Tolerance: Weight and Thickness: ±10%;Width: ±3mm;Length: Cut Roll:±0.3m,Jumbo Roll:±0.5%
Storage & Shelf Life: 12 months when stored at 21ºC(70ºF)/50% relative humidity out of direct sunlight.
Surface Preparation: It is essential, as with all pressure sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants
Product Use: It is essential that the user evaluate the DeYou product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on DeYou products between +10~+40ºC(+50 ~ 105ºF).