Home decoration furniture acceptance experience

>>> To buy solid wood furniture, we must first observe the advantages and disadvantages of wood

The decoration furniture refers to the furniture that the decoration worker produces on site, and mainly includes the closet, bookcase, writing desk, TV cabinet, coffee table and so on. Acceptance decoration furniture should pay attention to the following points:

1. Look at the appearance. Because the decoration furniture should be in harmony with the colors, textures, patterns, etc. produced by other carpenters, their finish materials and paint processes are basically the same. Checking the quality of the exterior of the decorated furniture is similar to the quality of the exterior of the inspection package. Mainly to see whether the surface paint film is smooth, bright, with or without flow defects, bubbles, wrinkles and other quality defects; also depends on whether the color difference of the decorative panel, the pattern is consistent, there is no corrosion, dead, broken residue; Whether the artificial board components are sealed and sealed are straight, with or without degumming, and whether the surface is smooth and bumpy.

2. Look at the process. The fine workmanship of the furniture is not fine and can be observed from the combined parts to see the rationality and firmness of the connection points between each component of the furniture. If a piece of furniture is modular, its hardware connector should be of high quality, and the degree of closeness of the hardware itself determines the overall degree of closeness of the furniture. The overall structure of the furniture, each connection point, including the connection point between the horizontal and vertical must be close together, can not have a gap, can not be loose. Drawers and doors should be flexible to open and close. The perimeter of the glass door should be polished clean, flexible opening and closing, no collapse, scratches, four corners symmetrical, hand position. The installation of various plug angles, bars and slides should be correct, solid, and flexible.

3. Look at the structure. Check whether the structure of furniture is reasonable and whether the frame is correct and firm. Gently push the furniture with your hand. If there is shaking or rattling noise, the structure is not firm. To check the verticality of the furniture: When the diagonal length of the plane is greater than 1 meter, the error in the vertical direction should be less than 1.5 millimeters; when it is less than 1 meter, the error should be less than 1 millimeter. Also check its warp degree: When the length of the plane diagonal is more than 1.4 meters, the warpage degree should be less than 2 mm, and when the diagonal length is less than 0.7 meters, the warpage degree should be less than 0.5 mm.

4. Look at the size. Furniture is not only beautiful, but more importantly, practical. Whether the size of the furniture meets ergonomic principles and meets the required size determines whether the furniture is convenient or not.

Construction Acceptance Furniture Brand Entrance Decoration Furniture Paint TV Decoration Window Drawer Cabinet Technology Glass Glass Door Glass Furniture Glass Door