How to use natural gas water heaters for natural gas water heaters

Because natural gas water heaters are hot, many consumers like to use them. Since the water heater is heated by natural gas, special attention is required when using it. How to use the natural gas water heater? Here's a look at the use of natural gas water heaters and related precautions!

How to use natural gas water heater

1. Before use, the position of each function knob should be determined according to operation instructions.

2. After the water valve is opened, the water heater will automatically ignite and discharge hot water. If the water valve is turned on, the water heater cannot be automatically ignited. We should close the water valve immediately to check whether the air source is turned on, water pressure, whether the pulse igniter works, and whether the battery No electricity will affect the ignition of the gas water heater.

3, to avoid improper operation and make the water heater only cold water, especially with hot and cold water conversion function of the water heater.

4. After the water heater is suspended midway, the hot water flowing out may be hot when it is reopened within about 10 minutes. At this time, the hot water accumulating in the water heater should be put out for bathing for a few seconds before it is likely to burn the skin.

5. When the water heater is used, the gas source must be turned off to prevent gas leakage and cause accidents.

6. Irregular inspection of the interface of the air supply pipeline for leaks, rubber hoses are in good condition, and whether there is cracking due to aging, should be promptly handled and replaced if found.

Natural gas water heater use matters needing attention

1. When using the gas water heater, be sure to open the doors or windows or the exhaust fan. Do not use the gas water heater for a long time. If there are many people bathing, there should be a certain gap.

2. The use of gas fired water heater suddenly turned off or sudden cold water should be quickly shut down until the professional inspection and then use, and sometimes due to indoor oxygen deficiency, water heater automatic protection function enabled to cut off the power, this situation is normal, to be fresh indoor air Use after circulation.

3. After using the gas water heater for a period of time, open the face case and wipe the ignition needle and flame sensing needle with a dry cloth. The force should not be too large when wiped. Otherwise, the position of the ignition needle or induction needle will be moved.

4. If the gas water heater is deactivated for a long period of time, be sure to shut off the air supply, remove the battery, open the anti-freeze device, and let it drain.

Xiao Bian summary: The above is how to use the natural gas water heater and the use of natural gas water heaters, the use of gas water heaters is very important. So everyone can learn about the above introduction. If you want to know more information, please continue to pay attention to this site, constantly updated so stay tuned!

Gas Water Heater Natural Gas Water Heater