Integrated ceiling installation FAQ

When the home is renovated, after the kitchen and bathroom wall tiles are finished, the next step is to install the aluminum plate. On the day of pasting the wall tiles, you can call the aluminum gusset manufacturer to agree on the time of the door measure. After the call, the aluminum gusset manufacturer will measure the door one day, and the 3-5 days after the completion of the rule can be delivered.

Before installing the aluminum gusset, if the bathroom water heater is half-packed in the aluminum gusset, it needs to be installed in advance. When fixing the water heater, it is best to use the expansion bolt to fix directly from the top of the coagulation to reduce unnecessary resonance. The kitchen first fixes the hose above the hood so that it does not open when the integrated ceiling is installed.

Please consider carefully when choosing aluminum gussets. Don't let your warm home appear.

In fact, any kind of goods have a good quality and a bad difference. Even if you buy a paper cup with a few cents and a few cents, is his quality different? I have used a few cents of paper cups, just fell The cup of water that has not been used in Sheung Shui has begun to leak water, and the paper cup of a few cents is not only fine workmanship, but also beautiful in color, it will not leak water. Other big products are self-evident, so I said that any kind of products are good. The difference with the bad, right? So it depends on how everyone's consumption standards determine the goods you buy. I believe most people still think that I spend a little more money, not so annoying, there is a guarantee The most affordable.

Brand importance:

Many consumers believe that aluminum gussets do not have too high technical content, and do not even need too good quality standards. Some consumers even say that they don't pay attention to the brand, which is even more wrong. First of all, the word ''brand'': the brand contains too much content, a product that can become a brand, it is after years of excellent quality assurance, after-sales service guarantee, credit guarantee, product replacement, etc. Comprehensive manifestation. In order to get branded products for consumers who can guarantee and persevere in service, a good product can be a well-known brand that is well-known in the household. It is a multi-faceted quality management and good reputation to be recognized, so any product has a brand. In terms of the point, the division of the brand is the distinction between quality and service.

For example: aluminum gusset brand products:

1. The board is made of high quality aluminum to ensure the flatness of the board and the elasticity of the board.

2, the surface treatment of the board using imported film or roller coating process to ensure the color of life and stability.

3, processing technology: all steel mold, keel and board buckle combination flat, strong, not affected by the installation of lights or exhaust fans, such as flatness or tripping phenomenon, to ensure the accuracy of the product.

4. Construction and after-sales: If there are any problems within 24 hours, they will immediately go to the scene to solve the problem. If there are any problems with the quality and service of the manufacturer, the first payment should be made to ensure that your consumption is fully guaranteed.

The above brand products are generally priced at 90-160 yuan in the market, the national standard thickness is 0.6mm, please do not mislead for some irregular operation storefront, you can use a micrometer card, or professional help to check.

The industry's Le Silong aluminum gusset plate can be said to be the father of aluminum gusset plate. It is one of the top 500 companies in the world, and its aluminum gusset plate products are the cutting-edge products in the industry. We can see the shaped gussets and conventional gussets in high-end places such as airports, office buildings and banks. If there is no high quality and technical standards, how can it be recognized, and how can we make such a difficult product. Therefore, aluminum gusset products not only have extremely high technical content, quality standards and environmental protection requirements, but also are one of the important development products in the decoration field such as home decoration and tooling. The thickness of the home improvement product is 0.6mm, which has become the enterprise standard of the industry. Please refer to it.

Installing an integrated aluminum gusset is an inspection of the tiling

After installation, the corners were found to have a raised portion, or the glue was opened in less than two weeks. There are two ways to install corners:

First, with gluing, this method was most common as early as a few years ago, but some workers may have the above mentioned conditions due to insufficient glue or poor glue quality. This method is now no longer used by regular companies because there are too many sequelae.

Second, first punch holes in the wall, align the holes in the corners with the holes in the wall, and then fix the corners on the wall with nails. The advantage of this method is that the glass glue is not used and the fixing is firm. Not easy to fall off. However, fixing by this method requires the owner to ensure that there is no problem with the wall tile, and there will be no voids. If the wall tiles are stuck with holes, it is easy to crack the wall tiles. Therefore, this party can also test the paste technology of wall tiles.

Why do you say this? Formally install the aluminum gusset plate, the corners are not glued to the tiles, but the holes are bound to the wall. In the process of ordering the corners, if the drill bit is perforated on your tile, the tiles are broken. Well, there is nothing to say, your tile has an empty drum, hurry to call the tile to re-stick it, or there will be suspects of falling in the future. Then there is the corner to your wall, you can immediately feel whether your tile is flat, which is the same as relying on the ruler.

After installation, you find that the board on the far side is just touched by hand and goes up. This is often because the workers did not open the bayonet on the corners, and sometimes they forgot the problem because of the carelessness of the workers. So this is also one of the criteria for checking whether your aluminum plate is hoisted.

Aluminum gusset ceiling FAQ

First, after the installation, it was found that there were fine seams between the individual boards, basically the installer did not install it. The installation technology of the workers is not in place, and the installation of the keel is uneven;

Secondly, there is a large problem of large seams. It is very likely that the aluminum gussets and keels you buy are not complementary products. (There are many vendors at the moment to make more profits, and they are cheaper to use other factories. Keel. Please be careful to buy the matching keel produced by the regular manufacturer. The board is very tight after being buckled, and the pitch of the keel and the board is also very accurate.

Concerned about surprises

Label: Integrated Ceiling Mount FAQ

Previous: Bathroom bathroom pendant purchase rule Next: Ignore decoration pollution is a fatal weakness