Paint painter safety technical operation procedures

Paint painter safety technical operation procedures

(1) Hand brushing:

1. Use flammable materials such as kerosene, gasoline, pine perfume, banana water, etc., must be placed in a special warehouse, indoor ventilation is good, smoking is not allowed, and fire extinguishers are installed. Hang the "No Fireworks" sign. When deploying, it should be equipped with protective equipment.

2. When the outer wall of the outer wall is suspended from the high place, wear a safety helmet and fasten the seat belt. Seat belts should be hung up and down.

3. Cotton yarn, rags, etc. contaminated with paint or thinner should be stored in a metal box in a centralized manner. When they are not used, they should be destroyed or washed with an alkaline solution for reuse.

4, when using wire brush, slab, pneumatic or electric tools to remove rust or iron scales, you must wear protective goggles; wear a work clothes to tie the neckline, cuffs, trousers, etc., the skin should not be exposed. When applying red rust anti-rust paint and lead-containing paint, pay attention to prevent lead poisoning. Wear a mask or gas mask when handling.

5. When applying acid-proof and corrosion-resistant peroxyethylene paint, due to the large smell and toxicity, wear a gas mask (mask) when applying the brush, and ventilate once every hour. The workplace should be well ventilated.

6, when using natural paint (national paint), to prevent poisoning. Do not touch the painted part of your body. After poisoning, use the camphor wood to soak the affected area, or use the leek to rub in the affected area or go to the hospital for treatment.

7. When painting the window, it is strictly forbidden to stand or ride on the window bar to prevent the column from breaking. When the brush is sealed along the board or the downpipe, it should be carried out using building scaffolding or special scaffolding.

8. When the brush roof is more than 25 degrees, the movable springboard protection railing and safety net should be set.

9. When applying brushwork, if you feel headache, nausea, nausea or palpitations, stop working immediately and switch to fresh air.

10. When working at night, the lighting fixtures should use explosion-proof lamps. When painting a large area, indoor lighting or electrical equipment must be installed in accordance with the explosion-proof rating.

(2) Mechanical spraying

1. Spray indoors or in containers, and maintain good ventilation (generally as far as possible in the open air). Fire or open fire operations are strictly prohibited around the work area.

2. If it is found to be unevenly sprayed during spraying, it is strictly forbidden to look at the nozzle, and the distance between the nozzle and the paint nozzle can be adjusted to solve. In general, it should be sprayed with water before construction, and then formally carried out without problems.

3. Wear anti-virus masks when spraying paints that are harmful to the human body. If it is harmful to the eyes, wear closed glasses.

4. When spraying lacquer and other volatile flammable solvents, do not use open flame or smoke.

5. In order to avoid static electricity accumulation, the spray booth or tank should be provided with a grounding protection device.

6. When spraying indoors or in containers, the installation of electrical equipment must be carried out in accordance with the explosion-proof grade.

7. When spraying in large area, the installation of electrical equipment must be carried out in accordance with the explosion-proof grade.

8. During the construction of the spraying personnel, if there is any discomfort such as headache, nausea, nausea or palpitations, stop the operation immediately and switch to the ventilation area. If you still feel unwell, you should go to the hospital for treatment.

[Follow the WeChat public number "Jiuzheng Coating Network"; pay attention to surprises, scan code to see "what is the paint sales? Absolutely! 》九正涂料网交流群]