Plum tube installation method Plum tube features

Plum tube is a building material, pvc particles as the main material plus other formulations through a unique mold formed by the plum tube shows a kind of plum-like communication pipe, also known as plum tube and honeycomb tube, such a pipe wall is smooth, Can directly wear fiber optic cable, can save man-hours, its structure is reasonable, high value, long life. Next Xiaobian introduced plum blossom tube installation methods and plum tube characteristics.

Plum tube installation method

1. The trenches for the pipeline shall be laid as straight as possible according to the design requirements and construction operations. For example, the bottom of the trench may be covered with a layer of fine sand. Before the pipe is buried, the hard substance in the ditch should be removed to prevent the pipe from being deformed. When starting to bury the pipe, the porous pipe should be reserved for 10-15CM in the manhole in order to wear the cable. The tube should be plugged to the sub-tube exposed at the manhole end. It is forbidden to mix foreign matters in the pipe when burying the pipe.

2. Pipe connection Place the pipe-shaped positioning rib upwards, clean the outer wall of the end pipe, insert the end of the pipe, and then insert a thick wood board on the end face. Beat the board with the hammer to make the pipe socket in place. At the other end of the direct interface, the other pipe is inserted directly and socketed in place so that it extends to the next manhole. In actual construction, the length of each plum tube is not necessarily the same as the length between manholes. In this case, the length of the pipe is measured according to the actual length of the manhole, and the length is cut with a hacksaw. Must be neat and tidy. After the docking is completed, one end of the manhole is required to be plugged with a pipe plug to prevent foreign matter from intruding.

3. For the initial installation and use of this product, do not backfill the soil first when laying the first section (the distance between two wells). Try to wear a hole or two holes with a cable wearer, and then pass it in smoothly and then lay it down. This will give you more confidence.

4. After the pipes are laid, they should be backfilled with fine sand or fine soil back to the height of the invading pipes. Do not leave the pipes in an open state and then backfill with other dirt. Do not use large stones or large dry blocks.

5. When the pipeline is subjected to damage to a more serious area by external forces, the joint hole is covered with cement concrete to ensure its absolute safety.

Plum tube features

The plum tube adopts a porous integrated structure, which has good rigidity and uniform stress. The product has a low coefficient of friction on the inner wall of the product and is light and easy to use. The construction is simple and easy. With multiple hole positions, the hole can be reserved to increase the utilization of communication holes. The product has a wide temperature range (+80-40) and can be used in tropical and cold regions. The connector adopts a socket structure. No need for any tools to complete the connection between the pipes to facilitate construction and maintenance. Plum tube life is more than 30 years under buried conditions. Performance index The color of the pipe is uniform and the color is white. Other colors can be customized according to the user's requirements. The pipe is smooth and flat with uniform color and does not allow deformation, distortion, or other defects. Internal and external pipe walls are not allowed to have cracks, breakages, and perforations. Marks should be durable and easy to identify.

Seven-hole plum tube product advantages

1. Seven-hole plum tube is made of polyethylene (PE) or polyvinyl chloride (PVC) with a special combination of components, which has outstanding low temperature resilience, bending resistance, compression resistance and impact resistance.

2, seven-hole plum tube selection porous integrated layout, good rigidity, uniform force.

3, seven-hole plum tube inner wall friction coefficient is small, light and easy to use, construction is simple and easy.

4, seven-hole plum tube has a number of holes, can be reserved for the hole, improve communication hole utilization.

5, seven-hole plum tube for a larger temperature scale (80-40), can be used in tropical and ice-cold areas.

6, seven-hole plum fittings use socket layout. There is no need for anything to complete the connection between the pipes for easy construction and maintenance.

7. The service life of the seven-hole plum tube is more than 30 years under buried conditions.

Editor's summary: About the plum tube installation method and plum tube characteristics introduced here, I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.

Heating Installation Renovation Installation Hydroelectric Installation Curtain Installation Method Construction Installation

38 Inch ABS Ceiling Fan