Aircraft Axe With Wooden Handle 800G Aircraft Axe Hammer,1250G A613 Axe,Wooden Handle Aircraft Axe Hammer,Aircraft Axe With Wooden Handle CHANGZHOU YIYITOOLS FACTORY , https://www.czyiyitools.com
First, the anti-stick spray gun material cavity and elbow with anti-sticking function, generally do not stick in the work, but after the end of each shift should open the rotor, check the elbow to clean up.
Second, should always pay attention to the maintenance and repair of the sprayer reducer. After every class of work, the foreign materials such as mixing materials adhering to the outer surface of the decelerator should be promptly cleaned; the oil standard should be observed frequently, and the oil should be promptly filled when the lubricant is insufficient. Lubricant is No. 50 industrial gear oil (sy1172-77s) or No. 46 mechanical oil; after a total of 250 hours (about three months), the lubricant should be replaced; the rotor square shaft bearing grease should be promptly filled (the top of the square shaft has Filling port).
3. When the sprayer is working for 8 hours, it needs to be overhauled and maintained to ensure that the spraying rotating arm is operating normally.
Fourth, each time the stoppage time exceeds 10 minutes, it is necessary to clean the spray gun and slurry pipe in time. Strictly dismantle, clean, install, and debug the spray gun according to the instruction manual to maintain the excellent spray performance of the spray gun.
5. Regularly clean the dust-laden blades and air ducts to keep the dust flowing; clean the spray booth once a month; remove the paint on the conveyor belt in time, and adjust the tightness of the conveyor belt.
6. Regularly clean the dust on the main box, ventilated cover holes, power supply and other devices to keep the heat radiating well and the components work properly. Replace the lubricating oil of the continuously variable transmission once every six months and lubricate the bearings in each shift.
Common spraying machine accessories are: steel liner, spray pipe, upper sealing plate, lower sealing plate, material cavity, quick connector kalan, elbow, material cavity, rubber spring, nozzle, nozzle holder, nozzle assembly and so on. Sealing plates and steel liners are the parts of the spraying machine and are the main components of the spraying machine. Therefore, they must always pay attention to their maintenance so as to ensure that no faults will occur during the work.