Coated abrasives have a wide variety of applications, from grinding applications toLook, one class is the manual use of varieties (sheet emery cloth, sandpaper andPartially rolled sandpaper); The other is for mechanical processing varieties(mainly belt, disc, wheel and ring).
1, large flat surface polishing, steel plate, plywood, leather.
2, mass production of workpiece surface sanding, printed circuit board, steel
Piano board, wooden furniture, etc.
3. Continuous polishing and grinding of metal strip. (Strip width ok
Above 1200mm, length is unlimited)
4, forming grinding and polishing of complex surface work.
5, all kinds of diameter metal tube, rod, roller cylindrical grinding and large diameter
In 25mm container, internal circular grinding such as: cylinder, hydraulic cylinder oil tank
And so on.
6, the page wheel and sand ring can replace polishing cloth wheel, realize polishing process automation.
7. Sand plate is used for grinding welding seam of large shell, box body and hull
Burr, paint, etc.
Coated Abrasive,Flap Wheel,Sanding Paper,Sanding Belts Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com
SPECIFICATIONS:
Model:
XGFT9300
Color:
white
Glass type:
E-glass
Mesh:
300
Fiber Diameter
9micron
Average Fiber Length
50micron
Aspect Ratio
5.5:1
Bulck Density
0.63g/cc
Moisture Content
<0.2%
Loss of Ignition
<0.2%
Alkali content/R2O(%)
≤0.80
Sizing
NO
PRODUCT PROPERTIES:
1.good flowability: good flowablity can let feeding process is easier when producing plastic compounds using twin-screw extruder or single-screw extruder.Mixing is easier with liquid resin,and the flowability is good.
2.good composite properties:this milled glass fiber was treated by high temperature without any silane coupling agent,so it need adjust formula according to the detailed products.
3.no grayish discoloration:because this model of milled glass fiber was treated by high temperature,so the surface sizing has been excepted,it will not affect the color of white products through high temperature molding.
4.excellent physical and chemical properties: this milled glass fiber has high tensile strength,elastic modulus,so it can reinforce the thermoplastics and thermosetting plastics,and improve its impact,tensile,compressive and flexural properties,improve dimensional stability and minimize distortion at elevated temperature.
STORAGE:
The milled glass fiber without surface treatment should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
Â
PACKAGING:
SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(each 1000kg.two layers)be loaded into 20 feet container.total net weight is 20.00 metric tons.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1000kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20 pallets(each 1000kg,two layer)be loaded into train's container.
PRODUCT DETAIL IMAGES:
teflon 7A TM 30B E glass glass powder is milled by ball grinder from fiberglass chopped strands which was treated by high temperature without any sizing,used for reinforcement in composite to increase mechanical properties(impact,tensile,compressive and flexural) ,improve dimensional stability and minimize distortion at elevated temperature.There is no grayish discoloration and it can not affect the color of finished products.
SPECIFICATIONS:
Model:
XGFT9300
Color:
white
Glass type:
E-glass
Mesh:
300
Fiber Diameter
9micron
Average Fiber Length
50micron
Aspect Ratio
5.5:1
Bulck Density
0.63g/cc
Moisture Content
<0.2%
Loss of Ignition
<0.2%
Alkali content/R2O(%)
≤0.80
Sizing
NO
PRODUCT PROPERTIES:
1.good flowability: good flowablity can let feeding process is easier when producing plastic compounds using twin-screw extruder or single-screw extruder.Mixing is easier with liquid resin,and the flowability is good.
2.good composite properties:this milled glass fiber was treated by high temperature without any silane coupling agent,so it need adjust formula according to the detailed products.
3.no grayish discoloration:because this model of milled glass fiber was treated by high temperature,so the surface sizing has been excepted,it will not affect the color of white products through high temperature molding.
4.excellent physical and chemical properties: this milled glass fiber has high tensile strength,elastic modulus,so it can reinforce the thermoplastics and thermosetting plastics,and improve its impact,tensile,compressive and flexural properties,improve dimensional stability and minimize distortion at elevated temperature.
STORAGE:
The milled glass fiber without surface treatment should be keep dry in their original bags and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.
Â
PACKAGING:
SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(each 1000kg.two layers)be loaded into 20 feet container.total net weight is 20.00 metric tons.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1000kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20 pallets(each 1000kg,two layer)be loaded into train's container.
PRODUCT DETAIL IMAGES:
Model NO.: XGFT9300
Glass Type: E-Glass
Filament Diameter: 9micron
Fiber Length: 50micron
Moisture: <0.2%
R2o: <0.8%
Loi: <0.2%
Color: White
Aspect Ratio: 5.5:1
Bulck Density: 0.63G/Cc
Trademark: XIANGU
Transport Package: 25kg PP Woven Bag
Specification: ROHS
Origin: Guangdong
HS Code: 7019110090
Model NO.: XGFT9300
Glass Type: E-Glass
Filament Diameter: 9micron
Fiber Length: 50micron
Moisture: <0.2%
R2o: <0.8%
Loi: <0.2%
Color: White
Aspect Ratio: 5.5:1
Bulck Density: 0.63G/Cc
Trademark: XIANGU
Transport Package: 25kg PP Woven Bag
Specification: ROHS
Origin: Guangdong
HS Code: 7019110090
teflon 7A TM 30B E glass glass powder is milled by ball grinder from fiberglass chopped strands which was treated by high temperature without any sizing,used for reinforcement in composite to increase mechanical properties(impact,tensile,compressive and flexural) ,improve dimensional stability and minimize distortion at elevated temperature.There is no grayish discoloration and it can not affect the color of finished products.