Wall coat construction method Wall clothing construction preliminary preparation

Wall clothing as a home decoration material, not only green, but also has a very good decorative effect, so it is widely used by people. Then, what is the construction method of the wall clothing? What are the preliminary preparations for the wall clothing construction? Let's let Xiaobian introduce the wall coat construction method and the preliminary preparation of the wall clothing construction.

First, wall clothing construction method

1. First, apply the previously prepared mixture to the spatula by hand, then rub the wall coat on the wall, and wipe it evenly with a roller to ensure that the thickness of the wall coat is about 1-2mm. Found that the wall after drying is uneven, you can pour a little warm water, and then mix in the wall of a good product, with a roller brush and then carefully brush roller pressure to make up for the naked without the need to add new materials.

2, in the final wipe the wall surface, the direction of the roller brush must be used in the opposite direction, this is because there is no direction of the roller coating will make the original texture of the product appears even more chaos, in the effect of sunlight refraction, this is no trace Glazed walls will create uneven visual effects that affect people's home experiences.

3, how to make the wall of the yin and yang corner brushing more uniform? Because the wall coat material is very thick, the wall of the yin and yang angle is not easy to spread evenly, so we must use plastic scraper putty to smear, and then use the roller brush Gently roll again.

II. Preliminary preparations for wall clothing construction

When decorating wall coverings on a wall, it is necessary to color a large enough and clean container for wall clothing. Since wall coverings are generally used as a whole pack, if there is not a confined container, it will definitely affect the quality and use of wall coverings. The impact of the number of years; after the entire wall pour into the container, according to the label on the bag, add a certain amount of warm water, and then stir the wall clothing to uniform, it is recommended that you must use clean water to prevent wall clothing In order to participate in some dirty things; in the early preparation of wall clothing construction, you must first mix the wall clothing for one and a half hours to use, this is because the use of early will damage the adhesive strength of the wall clothing, and the wall clothing The fluidity is also too great, and after one hour, it needs to be fully stirred to ensure even mixing and no agglomeration.

The above is all about the preliminary preparation of the wall covering construction method and the wall covering construction . I hope to help everyone. If you want to know more relevant knowledge, you can continue to pay attention to the relevant information of this website. Xiao Bian will bring more exciting content for everyone.