Due to the degradation of the diaphragm material, the perforation of the diaphragm material, the loosening of the active material, the use of two-pole connection, or the formation of dendrites through the diaphragm during charging causes an internal short circuit. After the deep discharge, the adsorption separator is prone to lead or dispersion. Precipitation, or formation of dendrites, resulting in micro-short-circuiting of the positive and negative plates.
Ec-spd dimming glass is a new type of electronically controlled tinted light glass developed and produced by using SPD (suspended particle) photosensitive characteristics. It can replace curtains and adjust the light and shade permeability effect, allowing users to freely choose their own indoor light. Hot melt glass, also known as crystal stereoscopic art glass or molten glass. It is the use of glass thermal processing technology, flat glass burning melting, depression into the mold, made into a variety of shapes.
Rear Projection Film imaging is adopted, and the projection effect is very outstanding. The appearance of the partition Smart Laminated Glass is good. Different from the traditional partition materials, the use of Pdlc Film Roll allows our consumers to have a better partition appearance. PDLC Smart Glass Film is a Smart Film Roll that encapsulates liquid crystal molecules in a polymer with a self-adhesive layer.
The installation of the Self-adhesive Film For Glass Door is a technical task. If there is a little carelessness in pasting, air bubbles will appear between the Custom Switchable Film and the glass.
Due to the redundant design of the negative electrode of the lead-acid battery , the charging efficiency of the charging in the first and middle stages is higher than that in the positive plate. Therefore, before the oxygen is deposited in the positive plate, the negative electrode has generated enough suede lead to recombine the oxygen. In the process of making a battery, the amount of the negative electrode active material is used as a control factor to alleviate the deterioration of battery performance.
In summary, the high temperature accelerates the battery water loss, thermal runaway, positive grid corrosion and deformation, low temperature will cause negative passivation failure, temperature fluctuation will accelerate internal short circuit of lead-acid battery, etc. Affects battery life. Welcome to http://
ITO Conductive Film,Smart film For Glass,ITO Film Sheet,ITO Film Roll,Tint Film For Building,ITO Smart Film
Tianqixun Technology , https://www.tqxdisplay.com