The installation of doors and windows in the decoration is a small project, but once the decoration is not qualified, it will cause a lot of trouble. Therefore, in order to avoid a series of problems, it is best to pay attention to a series of issues when installing, and today Xiaobian gives We summed up some! Because the demolition process will destroy the walls inside and out, it is better to replace the doors and windows before proceeding with the next renovation. Xiao Bian suggested that we should use high-quality brands of doors and windows, because the quality of doors and windows will determine the overall level of doors and windows, sealing and resistance to a series of issues such as aging. Second, choose doors and windows with good precision and strength Xiao Bian suggested that we must go to the formal building materials market, especially some poor plastic doors and windows, poor quality of the inner lining steel, and even without lining steel, improper selection of profiles, small cross-section, strength is not enough, other parts are also very poor. Third, why doors and windows will turn yellow Fourth, check the hardware is very important Styrofoam should be filled between the window frame and the wall, and the inside and outside of the window frame must be sealed with silicon copper glue or sealant to prevent water seepage. Remember, after installation, users should remove the protective film, which can extend the service life of doors and windows. Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia). Doors, windows, doors and windows installation Computer Control Torsion Testing Machine Spring Testing Machine,Torsion Test Equipment,Torsion Spring Tester,Computer Control Torsion Testing Machine Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com
Fifth, remember to install windows and doors 