Del flooring Nature Flooring Paint Window Heating Furniture Cement Bathroom Door Size Bathroom Size Bathroom Door Aquarium Lamp,Aquarium Bulb,T8 Coral Tube,T8 Coral Bulb Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com
1, the floor should be laid in the late construction, shall not cross construction. Lay and paint as soon as possible after laying. So as not to soil the floor or deform the moisture.
2. Before the floor is laid, it should be unpacked and stacked on the laying site for 1 to 2 days to make it adapt to the environment so as to avoid the expansion and contraction after laying.
3, laying measures should be done to prevent moisture, especially in the bottom and other relatively humid occasions. Moisture-proof measures are painted moisture-proof paint, shop damp-proof film, use bedding treasure and so on.
4, keel should be flat and solid, should not use cement reinforcement, it is best to use expansion bolts, the United States and other solid nails.
5, the keel should use strong nail holding larch, Liuan and other wood. The moisture content of the keel or wool floor should be close to the moisture content of the floor. Keel spacing should not be too large, generally not more than 30 cm. Both ends of the floor should be placed on the keel and must not be left empty, and nails must be nailed on each keel. Do not use water-based glue.
6, the floor should not be too tight, surrounded by enough expansion joints should be left, and should not be laid wide, in case of a wider occasion should be cut off, and then press copper transition.
7. Thorough isolation and moisture proof measures shall be taken at the junction between the floor and the hall, the bathroom and the kitchen.
8. The floor color difference is inevitable. If there is a higher requirement for the color difference, it can be sorted beforehand and a gradual transition method can be adopted to reduce the visual sense of sudden change.
9. Avoid flushing with water during use, avoid prolonged exposure to the sun, continuous direct air-conditioning, prevent rain forest at the window, and avoid collisions with hard objects. To protect the floor, the paint can be waxed.
Second, bamboo flooring maintenance and proper use and maintenance is the key to prolong the service life of bamboo flooring, in recent years, due to improper use of bamboo flooring by some users, causing some quality problems and complaints, in this case, both the need for dealers Or companies to do a good job of after-sales service, but also need to promote consumer use, maintenance knowledge.
Bamboo flooring should pay attention to the following points in use:
1. Maintaining indoor humidity and humidity Although the bamboo flooring has been dried, it has reduced its dimensional changes. However, since bamboo is a natural material, it will also be deformed due to changes in climate and humidity.
In the northern part of the country, when it encounters dry seasons, especially when it is heated, the indoor temperature can be adjusted by different methods such as using a humidifier or warm water and putting potted water. In the yellow season of the southern region, ventilation is done to keep the room dry.
For this reason, sunlight exposure and rain shower should be avoided as much as possible in the room, and the water should be wiped off in a timely manner.
2, to avoid damage to the floor surface bamboo floor paint, hard objects should be avoided, sharp scratches, metal friction and so on.
3. Correctly clean the floor During daily use, keep the floor clean. When it is clean, use a clean broom to sweep it, and then use a wringed mop to take a new look. If conditions permit, floor waxes will be applied in two to three months, which is better.
Third, maintenance of cork flooring Maintenance of cork flooring is simpler than other wood flooring. During use, sand should be prevented from being carried into the room. Individual sand particles can be carried in without affecting wear. Therefore, when the sand particles are carried in, they are pressed into the foot. Pressed into the elastic layer, it will pop again when the footsteps leave.
Of course, it should be reminded here that it is not appropriate to bring too much grit into the dirt, which will cause flow wear. Therefore, although it will affect the sand grains, it will wear out too much. Therefore, the sand grains brought into the room should be promptly removed, and there is no need to equip it. Vacuum cleaners do not have to worry about moisture, warping, mildew, etc.
For occasions with large passenger flow, after three or five years, if there is wear at an individual location, it can be partially used to make up, that is, to re-apply the coating to the local area. The method is very simple. Gently use sandpaper to polish the worn area and remove it. The scale on the surface, and then gently wipe with a dry soft cloth, re-coating the coating, or covered with polyester film in the local place.
Fourth, cleaning and maintenance of composite wood floors can usually use a vacuum cleaner or broom to clean the surface of the dust, and then wrung out after soaking to a non-drip rag or mop to wipe the floor surface. After opening the floor, it is best to open the doors and windows so that the air can circulate. You can also use electric fans to blow and dry the floor as soon as possible. In addition, to avoid damage to the composite wood floor wear layer, otherwise the moisture resistance and brightness of the floor will be affected. When walking on the floor, try to wear cloth slippers, and put a soft-bottom protective pad on the furniture's feet to avoid the furniture's "foot" scratching the floor wear-resistant layer, and don't let the heavy items smash the wear-resistant layer. Do not use sandpaper, sanders, steel brushes, strong detergents or metal tools to clean laminate flooring. If you have a cat in your home, you need to find a solution to the destruction of cat claws. It is recommended not to wax.
pay attention:
1. Never use water to wash the floor;
2, can not use a strong cleaning agent to clean the floor, the wear layer is aluminum oxide, which is amphoteric oxide, can react with acid, can also react with alkali.
3, to avoid alkaline substances, scrub with rice water is a good way.
4. Avoid sanding, waxing or painting on the floor.
First, solid wood flooring maintenance points