Lighting is an important part of modern home decoration. By combining the light color of the lamp, the shape and the combination of multiple lamps, the atmosphere of different living rooms can be enhanced to add luster to the room. Therefore, choosing a suitable lamp is an indispensable part of creating a perfect home space. Lamps commonly used in the family room can be classified into chandeliers, desk lamps, ceiling lamps, downlights, spotlights, etc. according to functions and layout. When choosing, we can start from the following aspects: First, purchase on demand The living room is a place for people to receive guests, and it is required to create a warm and warm atmosphere. Therefore, it is advisable for the living room to use solemn, bright chandeliers or ceiling lamps. If the room is high, an incandescent chandelier or a larger circular chandelier is preferred. This will make the living room look transparent. However, it is not appropriate to use all the chandeliers with downward light distribution, but the upper space should also have a certain degree of brightness in order to reduce the up and down. Difference in spatial brightness. The shape and color of the lamp should be coordinated with the furnishings of the living room. The lighting of the study should be based on the principle of brightness and softness. Lamps with incandescent bulbs are more appropriate. Desk lamps should be adapted to the nature of work and learning needs, should use direct reflection lamps with reflectors and lower openings, incandescent lamps and fluorescent lamps. The bedroom can be mixed with several kinds of lights. The soft and decorative lamps can make the bedroom warm and elegant atmosphere. The table in the restaurant needs a warm and bright effect, so it is advisable to use a downlight directly. The position of the lamp is generally just above the table. The wall of the dining table near the wall can be properly configured with warm-colored wall lights, which will make the atmosphere more entertaining guests. Ceiling lights are commonly used in kitchens, bathrooms, and aisles because these places require little light, large amounts of water vapor, and dust. The use of ceiling lamps is easy to clean and helps to protect the light bulbs. The lighting in the kitchen should be easy to scrub and corrosion resistant. In the bathroom, lamps with moisture-proof and rust-proof features should be used. Second, safety first Look at the quality when choosing lamps and lanterns, check the warranty book, and whether the certificate is complete. The most expensive is not necessarily the best, but too cheap is certainly not good. The quality of many cheap lamps is not enough, but it is often hidden. In the event of a fire, the consequences are disastrous. So how to buy a safe lamp? 1. Pay attention to protection against electric shock. The electric shock caused by lamps and lanterns is generally caused by non-compliant lampholders or lamp live parts without cover and other protection measures against electric shock. It is normal that the bulb is screwed in when it is used. After the lamp is powered on, people must not touch the live parts. 2. Pay attention to the cross-sectional area of ​​the wire used in the luminaire: when purchasing, you can look at the marks printed on the insulating layer outside the wire on the luminaire, and specify that the minimum cross-sectional area of ​​the wire used on the luminaire is 0.5mm/square, and some manufacturers should reduce the cost. The cross-sectional area of ​​the conductor used in the product is only 0.2mm/square. In an abnormal state, the wire will be scorched and a short circuit will occur after the insulation layer burns out. 3. Pay attention to the accessories of the lamps: If electronic ballasts are used in lamps, lamps with abnormal protection electronic ballasts should be selected. If the lamp uses an inductive ballast, try to use a higher tw value (such as tw130), especially when the lamp cooling conditions are poor, it should pay attention to this point. Tw is the rated maximum operating temperature of the ballast coil. At this temperature, the ballast has a continuous life of 10 years. Third, consider the overall situation That is, the choice of lighting should pay attention to the same style as the residence. The color, shape and style of the lamps and lanterns must be commensurate with the interior decoration and the style of the furniture, echoing each other. Fancy lighting not only does not add icing on the cake, but it is superfluous. In addition to matching the interior color tone, the choice of lighting color can also be based on personal preference. The size, type, and size of the fixtures must be coordinated with the size of the living space, the total area, and the height of the room. Finally, the purchase of lighting should be decided according to their own economic conditions, and the ability to do it. Lamps and lanterns to buy lamps and lanterns brand chandelier space lighting lighting table furniture decoration living room decoration style study furniture small study bathroom size home furnishings bedroom lighting restaurant furniture bedroom decoration home bedroom lamp Kitchen sink mixer Pull Out Kitchen Sink Mixer,Pull Down Kitchen Sink Mixer,2 Ways Kitchen Sink Faucets,2 Handles Kitchen Sink Faucets SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handybasinfaucet.com
Philips Lighting
Kitchen sink mixer is suitable for all kinds of kitchen sinks, single hole deck mounted installation, outlet water pipe can be rotated 360°. Main body use A Class H59 brass gravity casting. The surface finished by 8 - 12μm thickness electro plating, bright and corrosion resistance. Two pieces of 40cm flexible hose include in kitchen sink mixer package.