With the improvement of living standards, the number of cars has been increasing, and the
driving recorder has become the in-vehicle electronic product that every car owner considers to install. More and more people have entered the field of vision of the riders and become a must-have tool for the majority of drivers. . Because the driving recorder is a new in-vehicle electronic product, everyone often encounters some problems in the process of using the recorder: dust, such as dust, gets on the magnetic head of the recorder, causing a drop in the quality of the captured image, and dust. It will also increase the friction between the head and the tape, which will cause further damage to the magnetic head. At this time, how to maintain the driving recorder becomes a problem. Today, I will give you a brief introduction and hope to help everyone.
Http://cn.ljyelectronic.com
When going on a long vacation, all roads are generally full of cars, especially some attractions can be described by the shoulders, this time you need a driving recorder to ensure the rights. First of all, you should install the machine on the windshield of the car. Do not block the line of sight as much as possible. Otherwise, it will bring you the driving. Secondly, you must hold the machine steady during shooting to prevent the machine from falling due to accidental collision. Ground, this time, a shoulder strap will bring you some little help, you can use it to drive the driving recorder to the shoulder, it is more labor-saving, and can be troubled when shooting, more stable installation of the machine, to ensure The body does not shake, so that the captured image is relatively stable, and can record the scenery along the way, is the best companion for driving. But we feel tachograph convenience at the same time, we want to know how to tachograph maintenance. How to maintain a driving recorder, we explain in several ways.
Driving recorder lens protection
The lens is one of the most important parts of the driving recorder. When you are traveling, be sure to pay a UV mirror to your driving recorder, in some special occasions, such as water, humid air and ski resorts, due to many uncertain factors. It may cause the lens to be stained. At this time, a UV mirror can be used to protect the lens. As long as the UV mirror is well wiped, the UV mirror is definitely a must for the National Day holiday. The driving recorder lens is a must. Once damaged, the recorded video must be unclear, which may lead to the inability to restore the truth?
We should first use the ear wash ball to blow the dust on the UV mirror a few times, then use the lens brush to gently sweep it. Finally, wipe the lens with lens paper. Do not rub the ring while wiping, but should be from the side of the lens. Rub straight to the other side straight, then repeat this action until the UV mirror is clean.
Use the battery correctly
The current driving recorders generally use lithium-ion batteries. When we travel, we should store the batteries in a dry, cool environment, and try to avoid storing the batteries together with ordinary metal objects to prevent short-circuiting of the batteries; It is easy to make the battery dirty when traveling, which may cause the battery to lose. In order to avoid the problem of power loss, we must pay attention to keep the contact points at both ends of the battery and the inside of the battery cover clean. If the surface of the battery is dirty, then we should use a soft, clean dry cloth to gently wipe the surface of the battery in time to keep the battery clean, so that your battery will last forever.
Driving recorder maintenance soft and hard
First, hard protection
The so-called hard protection refers to the use of the necessary "hardware" to protect your love machine, for example: protection lens: When you travel, you must pay attention to your own driving recorder with a UV mirror, can give you The DV brings multiple protections. In other special occasions, such as waterside, humid air and ski resorts, you can shoot outdoors without worrying about the damage of the recorder lens.
Prepare the cleaning kit: After driving for a long time, the driving recorder may accumulate a lot of dust, so always wipe the recorder with a soft cloth or the like to keep it clean. The cleaning tools must be prepared, including ear washing, small brush and lens paper. Before wiping the camera, it should be absorbed first to remove the oil on the hands. The dust on the lens is first blown with the earballs several times, then the lens is used. Brush the brush gently, and finally wipe the lens with lens paper. Do not rub the ring while wiping. Instead, wipe it straight from the side of the lens to the other side. Be careful not to rub it back. Instead, repeat it. An action that wipes from scratch.
Second, soft protection:
High humidity: If the driving recorder works in a humid environment, it is easy to cause circuit failure, and it is easy to make the lens of the recorder moldy. Sometimes the mold inside the lens may cause damage to the captured image, which is more serious. The greater the humidity of the air, the faster the wear of the video head will directly affect the service life of the driving recorder.
Multi-smoke: The driving recorder should work in a clean environment, which can reduce the pollution of external dust. In the case of smoke, the smoke will fall into the lens of the machine and directly affect the clarity of the captured image, falling into the gap of the fuselage. The soot particles are very difficult to remove, and the dust falling on the head or the tape will damage the head and the tape like sand. In addition to causing the image to be unclear, it will damage the tape or even the head!
Low temperature: The car driving recorder only works in an environment of 0-40 degrees Celsius. At too low temperature, many electrical components will operate in an abnormal way. The magnetic head is the first to bear the damage, followed by the CCD image sensor. And the lens, and the DV belt used in the low temperature environment will also cause greater friction between the head, so we should try to avoid shooting in low temperature environment.
High temperature: When the driving recorder is used for a long time in a high temperature environment, the internal temperature rises, often forming internal heat accumulation. If the hot gas is not excluded, the electrical components will be deteriorated and the life of the electrical components will be degraded. The core of the driving recorder - CCD The high temperature resistance is limited, and many of the components of the current home drive recorder are plastics. The long-term heating will deform the casing, the keys will fail, and the interface will not be plugged and unplugged! Generally speaking, when using the driving recorder in the high temperature season, the working time should not exceed 1 hour. When it takes a long time to shoot, take a rest for 10 minutes before shooting, so as not to damage the machine!