China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting

Model NO.: DN20-4000mm
Material: FRP
Fiber Type: GFRP
Type: Polyester FRP
Standard: Awwa, ASTM, GB, DIN, JIS
Design Temperature: -40-200 Degree
Stiffness: 2500, 5000, 7500, 10000, 20000, or Required
Length: 3-12m
Trademark: ZHONGYI
Transport Package: Seaworthy or Customized
Specification: PN0.1-2.5Mpa
Origin: China
HS Code: 3917290000
Model NO.: DN20-4000mm
Material: FRP
Fiber Type: GFRP
Type: Polyester FRP
Standard: Awwa, ASTM, GB, DIN, JIS
Design Temperature: -40-200 Degree
Stiffness: 2500, 5000, 7500, 10000, 20000, or Required
Length: 3-12m
Trademark: ZHONGYI
Transport Package: Seaworthy or Customized
Specification: PN0.1-2.5Mpa
Origin: China
HS Code: 3917290000
China Manufacturer FRP / GRP Fiberglass plastic pipe fitting

Zhongyi FRP manufactures hand lay up and filament wound FRP pipe in all commercially available resin systems, including polyester, vinyl ester, furan, phenolic, and epoxy thermoset resin systems. Resin systems as well as reinforcements are tailored for specific applications. FDA compliant materials are available, as are flame retardant and dual containment FRP pipe systems.

The design of any pipe system must take into account many different factors. Corrosion allowances, operating pressure, vacuum, temperature, abrasion, flammability, electrical conductivity are just a few of the char- The system analysis is completed using conventional techniques, substituting appropriate physical properties for the fiberglass system specified. A typical Specification
for fiberglass pipe is also available in this catalog binder.
 
Fiberglass reinforced thermoset plastic pipe (or FRP pipe) is often the material of choice for corrosive process systems. This is due to a variety of factors:
An ability to be tailored for a wide variety of corrosion resistant conditions
Light weight (less than 20% of steel, 10% of concrete)
Excellent strength to weight (stronger than steel on an equal weight basis)
Low coefficient of friction (>25% better than steel)
Good dimensional stability
Low thermal conductivity (saving insulation costs)
Low long-term maintenance costs
An evaluation of the total cost of the system, including all of the above variables, often demonstrates cost savings for fiberglass FRP pipe vs. steel, with even greater cost savings over alternative alloy constructions.

DESIGN CONSIDERATIONS:
Fiberglass FRP pipe design is greatly influenced by the process design. The process will generally determine
the required corrosion liner resin selection and thickness,the design and operating temperatures, pressures, and vacuum.Following a determination of the above criteria, the mechanical design of the fiberglass pipe laminate structure begins. The laminate design will balance the economic benefit of various resin and reinforcement characteristics to meet the specified process design. Finally the overall system is evaluated for proper support, thermal expansion stresses, and compliance with appropriate codes. In the sections that follow, key relationships for fiberglass FRP pipe are highlighted. At the end, a life cycle cost comparison is shown to demonstrate the cost effectiveness of fiberglass pipe vs. steel.  
 
The latest technologies are implemented in the production process at the Zhogyi FRP with the  ensuring high quality products.  Zhogyi FRP offers customers flexible and continuous service for turnkey projects or maintenance.
The specification of FRP pipe:
Diameter: DN10mm-4000mm
Pressure grade: 0.25MPa,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Length: 6m, 12m , or customized.
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting



China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
Typical Dimensions:
 
DN L 0.6MPa 1.0MPa 1.6MPa
( mm ) ( mm ) TH ( mm ) TH ( mm ) TH ( mm )
10 1800 4.6 4.6 4.6
15 1800 4.6 4.6 4.6
20 1800 4.6 4.6 4.6
25 1800 4.6 4.6 4.6
32 1800 4.6 4.6 4.6
40 6000 4.6 4.6 4.6
50 6000 4.6 4.6 4.6
65 6000 4.6 4.6 4.6
80 6000 4.6 4.6 4.6
100 6000 4.6 4.6 4.6
125 6000 4.6 4.6 4.6
150 6000 4.6 4.6 4.6
200 12000 4.6 5 . 9 5.1
250 12000 4.8 5 . 9 5.7
300 12000 4.9 5 6.4
350 12000 4.9 5.1 7.5
400 12000 4.9 5.8 8.2
450 12000 5.3 6.2 8.9
500 12000 5.4 6.7 10
600 12000 6.3 7.6 11.3
700 12000 6.7 9.1 13.1
800 12000 7.2 10 14.6
900 12000 8.2 10.9 16.4
1000 12000 9.1 11.8 17.7
1200 12000 10 13 19
1400 12000 11.3 14.6 21.5
1500 12000 12.2 15.6 23
1600 12000 13.1 16.6 24.5
1800 12000 14 18.5 27.2
2000 12000 15.8 20.5 29.8
2100 12000 17.6 21 31.1
2200 12000 19.5 22 32.4
2400 12000 20.5 24 35.5
2600 12000 22.7 26.5 38
3000 12000 28 32.5 44.2
3200 12000 31 36 47.5
3600 12000 33 39.5 52.4
4000 12000 34.5 45.3 57.8
                                                                                      


Engineering Mechanics Index of FRP/Composite Material (1)
1,Pipe  
Hoop tensile strength 200~300MPa
Longitudinal tensile strength 50~100MPa
Longitudinal flexural strength 140MPa
Interlaminar shear strength 50MPa
Crosslaminar shear strength 60MPa
Hoop modulus of elasticity 25GPa
Longitudinal modulus of elasticity 12.5GPa
Shear modulus of elasticity 7GPa
flexural  E--modulus 9.3GPa
2,Fitting  
Tensile strength 120-290MPa
Flexural strength 210-410MPa
Compression strength 130MPa
Tensile modulus of elasticity 9.5GPa
Flexural  E--modulus 9.0GPa
Remarks: The data in the table is the typical data

FAQ
Q: Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products manufacturer in China
 
Q: Can your factory customize the machine for clients ?
A: Yes, we can.
 
Q: What is your payment terms ?
A: Normally,30% as the deposit first by T/T, the rest 70% will be paid before shipping by T/T.
 
Q: How about after-sales service ?
A: 3 year free warranty, Lifetime technical service support.
 
Q: How can I install the production line and get a commissioning ?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.
  China Manufacturer FRP / GRP Fiberglass plastic pipe fitting

Zhongyi FRP manufactures hand lay up and filament wound FRP pipe in all commercially available resin systems, including polyester, vinyl ester, furan, phenolic, and epoxy thermoset resin systems. Resin systems as well as reinforcements are tailored for specific applications. FDA compliant materials are available, as are flame retardant and dual containment FRP pipe systems.

The design of any pipe system must take into account many different factors. Corrosion allowances, operating pressure, vacuum, temperature, abrasion, flammability, electrical conductivity are just a few of the char- The system analysis is completed using conventional techniques, substituting appropriate physical properties for the fiberglass system specified. A typical Specification
for fiberglass pipe is also available in this catalog binder.
 
Fiberglass reinforced thermoset plastic pipe (or FRP pipe) is often the material of choice for corrosive process systems. This is due to a variety of factors:
An ability to be tailored for a wide variety of corrosion resistant conditions
Light weight (less than 20% of steel, 10% of concrete)
Excellent strength to weight (stronger than steel on an equal weight basis)
Low coefficient of friction (>25% better than steel)
Good dimensional stability
Low thermal conductivity (saving insulation costs)
Low long-term maintenance costs
An evaluation of the total cost of the system, including all of the above variables, often demonstrates cost savings for fiberglass FRP pipe vs. steel, with even greater cost savings over alternative alloy constructions.

DESIGN CONSIDERATIONS:
Fiberglass FRP pipe design is greatly influenced by the process design. The process will generally determine
the required corrosion liner resin selection and thickness,the design and operating temperatures, pressures, and vacuum.Following a determination of the above criteria, the mechanical design of the fiberglass pipe laminate structure begins. The laminate design will balance the economic benefit of various resin and reinforcement characteristics to meet the specified process design. Finally the overall system is evaluated for proper support, thermal expansion stresses, and compliance with appropriate codes. In the sections that follow, key relationships for fiberglass FRP pipe are highlighted. At the end, a life cycle cost comparison is shown to demonstrate the cost effectiveness of fiberglass pipe vs. steel.  
 
The latest technologies are implemented in the production process at the Zhogyi FRP with the  ensuring high quality products.  Zhogyi FRP offers customers flexible and continuous service for turnkey projects or maintenance.
The specification of FRP pipe:
Diameter: DN10mm-4000mm
Pressure grade: 0.25MPa,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Length: 6m, 12m , or customized.
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting



China Manufacturer FRP / GRP Fiberglass Plastic Pipe Fitting
Typical Dimensions:
 
DN L 0.6MPa 1.0MPa 1.6MPa
( mm ) ( mm ) TH ( mm ) TH ( mm ) TH ( mm )
10 1800 4.6 4.6 4.6
15 1800 4.6 4.6 4.6
20 1800 4.6 4.6 4.6
25 1800 4.6 4.6 4.6
32 1800 4.6 4.6 4.6
40 6000 4.6 4.6 4.6
50 6000 4.6 4.6 4.6
65 6000 4.6 4.6 4.6
80 6000 Spiral Pipe Machine

Double-sides spiral submerged arc welded pipe machine is main product in our company, after several years of exploration and continuous improvement, the spiral welded pipe mill`s technology level has been in the leading position in the world, it is also the most reliable and loyal partner of steel pipe factories.

Spiral Pipe Machine,Spiral Welded Machine,Spiral Pipe Mill,Spiral Welded Pipe Machine

Shanxi KathayTech Co.,ltd. , https://www.ccagoods.com

April 23, 2024