Construction Acceptance: Acceptance Criteria for Home Furnishing Carpenters and Painters

Ivy paint

Woodworking acceptance criteria

1. Carpentry Enter the construction site to be familiar with the construction drawings, look for all required projects, arrange the construction procedures, and pop up the horizontal lines of all rooms (if there is ceiling construction, work should be done from top to bottom, pop-up ceiling elevation and hanging point construction).

2. The gap between the installation gypsum board must be 3mm, and the self-tapping screws must be recessed into the surface of the plasterboard.

3, the protection of the cabinet is equally important, so that no string of nails clean, no glitches.

4. The basic frame size of all wooden products should be accurately divided and kept horizontal and vertical.

5. When plying, the distance between the rows of nails must be the same, and the mosquito gun must be used when plying the panel.

6, door and window cover production must be kept horizontal and vertical, flat and smooth floor, before brushing latex, brushing glue must not have leakage, in order to facilitate the adhesion of the bottom layer of the panel.

7. Accurately divide the dimensions of furniture production to prevent unnecessary influence when making cabinet doors. The corners of cabinet doors must be kept straight.

8. The production of the door pocket line and the window sleeve line must be strict with the 45-degree diagonal and the interface seam. The application of the line protruding panel should be smooth and flat, and the surface layer of the panel must not be damaged during processing.

9, cabinet door installation seam size is uniform, the drawer mouth must be closed without burrs, all the cabinet door switch freely, drawer push-pull unimpeded.

10, do a good job of protection of finished products, not allowed to readily put the nails and construction tools on a good panel, so as not to have scratches affect the overall effect. Once the consequences are found at your own risk, the construction site must be kept clean and cleaned once a day.

11. Check all the finished wooden products again and make sure that there are no problems.

Painter acceptance criteria

1. Whether the surface of furniture oil is saturated or not. Make sure there are no blisters, no cracks, and that the paint thickness is uniform and consistent in color.

2, wallpaper patchwork is not accurate, no tearing phenomenon. Patterned texture patches should be accurate and error-free.

3. Whether the emulsion paint on the wall surface is smooth and uniform, there is no hollowing, blistering, cracking phenomenon.

4. Whether the surface of furniture varnish has the same thickness, the paint surface is saturated and clean, and there is no particle.

5, wood and plaster ceiling paint is generally latex paint, the surface should be flat, there is no crack at the board junction.

6. Whether the connection of the ceiling angle line is smooth, there is no obvious deviation and distortion.

7. Whether there is pollution on the wall or there is no stain.

Construction Acceptance Paintwork Decoration Carpentry Knowledge Lacquer Furniture Window Lacquer Paint Switch Drawer Cabinet Door