Does the toilet floor do not have a slope?

Just finished renovation! The bathroom in the house is always stagnant, and my friends say that the slope of the ground did not stay enough. For the first time decoration, nothing was known. Now the water splashed out from the shower is not going down. I had to use a mop every day to drag it. To solve the problem, the tiles are laid out. Do you want to get up and do it again?

People usually only consider how beautiful and stylish the decoration is when they are decorating, but at the same time they tend to ignore small details. For example, when the bathroom is being renovated, there is no slope, which leads to the accumulation of toilets on some people’s floors. A beach of water, the long run, flooding will affect the use of bathroom functions or damage the waterproof layer, causing the ground to leak! This is a very noteworthy problem, but also brings inconvenience to everyday life. Therefore, at the beginning of the renovation, the drainage slope of the bathroom is calculated well! Ms. Zhuo at the Maritime International Garden also encountered the same problem. Today, Miss Zhuo analyzed the need to do a slope and did not do a slope solution, hoping to help Miss Zhuo and the owners who encountered the same problem.

First, why do bathroom floors make slopes?

Because of the water in the bathroom, in order to allow the water to flow into the floor drain as quickly as possible, the ground must have a certain slope. There is no specific requirement for the size of the slope. Some owners prefer a small slope, as long as no water is left on the line. Some owners need a relatively large slope. In order to make the water faster, even if the water is not running, the water will not flow out when bathing.

Second, what is the standard for drainage slope?

The floor elevation of the bathroom should be 20-50mm lower than in the room. The ground-drainage drainage slope is one to two percent to three percent. When the bathroom is backfilled and leveled, it should be radiated in four directions with the floor drain as the center, and the gradient should be determined. The slope should be leveled with a scraping ruler. The surface should be smooth, the surface should be flat, no gap, no sand, and no accumulation of water should prevail.

Not only does the ground need to be graded, but also when the water pipe is installed, the slope of the water pipe should be taken into account. The water supply pipe should be sloped from 0.002 to 0.005 to the drainage device or water distribution point. The water supply pipe should have a slope gradient of not less than 0.003 to the outdoor water supply. tube.

Bathroom bathroom decoration ground acceptance