Expert Weapons: Three Steps for Home Inspection Acceptance and Rest assured Quality

In September, when the decoration season began, many consumers thought that after signing the renovation contract with the home improvement company, the rest could be handed over to the decoration workers. In fact, in order to prevent certain irresponsible decoration teams from cutting corners and shoddy work during the construction process, consumers should focus on the acceptance process within their capabilities. Each stage of the project is completed, and the subsequent steps are carried out after acceptance, so as to ensure the final decoration quality.

Star mattress / soft bed

1 Material: signing a detailed material list when signing a contract

When signing a contract with a customer, the formal decoration company will sign a material declaration sheet detailing the brands, specifications and quality grades of the required materials. The parties shall check the materials according to the material specification. In general, the materials to be checked before construction include pipes, wires, planks, putty, cement, sand, etc. As the project advances, ceramic tile, paint, and paint will be accepted later.

[Acceptance notice]

Time of acceptance of agreed materials

After the material is purchased, the purchaser must notify the other party to the contract to prepare for the acceptance of the material, preferably when the material enters the site. The agreed acceptance time is very necessary to avoid material entry, the other party does not have time to accept the material, affecting the construction progress.

Acceptance must be present

The home improvement contract stipulates that after acceptance of the materials, the inspector must sign on the site to avoid unnecessary troubles or disputes later. The inspector shall carry out the necessary inspections for each material agreement stipulated in the contract, such as brands, specifications and quantities.

Acceptance person should sign on acceptance form

If the inspection result material is qualified, the acceptance person should sign the material acceptance form. If the owner finds that the entry materials are inconsistent with the contractual requirements, he may refuse to sign the material acceptance checklist until he negotiates with the home improvement company for settlement.

2 Covert Projects: Acceptance before Closed

In the early stage of the project, pre-acceptance should be carried out for completed concealed projects such as hydropower projects. Because these projects will be obscured when they are completed, they must be checked before they are closed to prevent concealment from becoming a hidden problem.

[Acceptance notice]

Circuit: Note whether the wire is up to standard

Since the switch panel has not yet been installed at this time, when the circuit is accepted, the consumer pays attention to whether the used wire is the designated brand and whether the wire is up to the standard.

The wires used should meet the maximum output power of the electrical equipment. In general, the average household lighting requires a wire with a cross-sectional area of ​​2.5 mm2, and the air conditioners and other household appliances use a wire with a cross-sectional area of ​​4 mm2.

Dark lines buried in the wall must be installed outside the casing, the casing material is better than PVC material or galvanized iron pipe.

Decoration Process Decoration Experience Concealer Decoration Home Decoration Paint Decoration Company Room Kitchen Wall Tile Door Kitchen Cabinet Door Bathroom Tile Bathroom Door Bathroom Wall Tile Bathroom Wash Basin Bathroom Design Toilet Waterproof Kitchen Tile Balcony Tile Tile Tile Specification