Long Hole Expanded Metal Mesh (kdl-95)

  • Model NO.: kdl-95
  • Application: Construction Wire Mesh, Protecting Mesh, Decorative Mesh, Filter
  • Usage: Protection, Aquaculture, Water Conservancy Construction, Civil Building, Railway Construction, Road Construction
  • Surface Treatment: Coated
  • Galvanized Surface Treatment: Hot-galvanize
  • Specifications: Strand
  • Pack: 5PCS Per Bundle
  • Other Material: Galvanized Carbon Steel or Stainless Steel
  • Transport Package: Tightly Tied with Steel Straps on The Pallet
  • Origin: China
  • Material: Aluminum Plate
  • Hole Shape: Diamond
  • Weave Characteristic: Tensile
  • Stamping Expanded Metal Mesh Category: Expanded Metal Mesh
  • Hot-galvanize Technique: Line Annealing
  • Weight: Light-weight
  • Label: as Required
  • Trademark: KDL
  • Specification: 1mx2m
  • HS Code: 73145000
Flattened expanded metal is formed by passing regular or raised expanded metal through a cold rolled reducing mill. In this process the overall thickness is reduced. The sheet is then sent through a leveler to maintain its flatness. A smooth, flat and level sheet is created. Metals commonly expanded include but are not limited to…
Steel- Cold Rolled (CRS)
Hot Rolled (HRS)
Electro Galvanized Steel
Stainless Steel
Aluminum
Titanium
Brass
Copper
 
Classification of Expanded Metal
Expanded metal is defined by Type, Class and Grade per ASTM F1267. Type and Class are required when specifying and ordering.
Type I-Expanded
Type II-Expanded and flattened
Class 1-Uncoated.
Class 2-Hot-dip zinc-coated (galvanized).
Class 3-Corrosion-resisting steel.
Grade A-0.0025 in. (0.06 mm) minimum coating thickness.
Grade B-0.0012 in. (0.03 mm) minimum coating thickness.
The illustration to the right shows that the strands and bonds form a sharp angle to the original plane of the solid sheet.
Sheets are expanded in the regular form.

When describing or ordering expanded metal the SWD (Short Way of Diamond) is referenced first and the LWD (Long Way of Diamond) is listed second. The illustration below on the left is standard orientation with the SWD running the short length of the panel.
The illustration on the right shows reverse diamond with the SWD running the long length of the panel.

Styles (additional sizes available by special order):
3/4 #9 (10 gauge) Steel & Stainless Steel (304)
3/4 .125 (8 gauge) Aluminum

Topmount Sink

Tpomount sink

The installation of the countertop basin is easy, as long as the hole is opened on the countertop. There are a variety of sink edge designs for over-counter basin sink styles to choose from. It is necessary to ensure that the connection gap between the sink and the countertop is uniform, and there is no water seepage.

The basin with the decorative edge on the table or the whole basin on the table is called topmount sinks.

In short, the basin protruding from the table is the basin on the table.

Customized different sizes and PVD colors.

Topmount Sink,Top Mount Bar Sink,White Top Mount Sink,Top Mount Double Sink

Jiangmen MEIAO Kitchen And Bathroom Co., Ltd. , https://www.meiaosink.com

March 10, 2024