The solar condenser field is the technology with the highest requirements for scale production and the most difficult installation in the solar thermal power generation system (CSP). It accounts for about 60% of the total system investment in the trough, tower, dish, and Fresnel solar power generation systems. the above. Therefore, the development of low-cost, high-efficiency solar concentrator technology is the key to significantly reducing the cost of solar thermal power generation systems (CSP) and replacing traditional energy sources.
The new solar power condenser glass aluminum composite fixed product developed by Changzhou Xuwang New Energy Co., Ltd. has attracted extensive attention at the just-concluded Shanghai Solar PV Exhibition. This technology will reduce the cost of the solar thermal power condenser spot by more than 50%, and it can also increase the cost. The power generation efficiency of the entire solar condenser field.
Taking the slotted solar thermal power condenser lens exhibited by Changzhou Xuwang New Energy Co., Ltd. at this conference as an example, the opening area is 1.5 meters (the opening area can be determined according to customer requirements), and a two-millimeter tempered silver-plated mirror is used so that reflection is made. Efficiency of over 95% (General trough condenser due to strength and wind resistance requirements, silver plating mirror to 4 mm or more, the reflection efficiency due to the thickness of the glass and the production process problems generally only reach 93%); silver back due to Full coverage without the need for special high-cost anti-aging protective layer; with the company's optical design, the reflected spot is straight without any astigmatism at a spotlight ratio of 100; due to the silver-plated mirror integrated into the aluminum synthesis technology, the thickness reaches 30 Millimeters (the thickness of ordinary slotted silver plated mirror body does not exceed 8 mm with protective layer or coated glass) greatly enhance the strength and reliability; the weight of the integrated silver plated mirror is only 9 kg per square meter (than Ordinary slot mirrors are more than 50% lighter; because the silver plated mirror module integrates part of the bracket fastening structure to make integration, the mirror field bracket system is greatly simplified. Simple, dramatically reducing the cost.
