Zebra Nail File Sandpaper,Sand Paper For Nail File,Abrasive Paper Sheet For Nail File,Sand Paper Sheet For Nail File Beauty Foshan Nate Abrasive Science & Technology Co.,Ltd , https://www.nateabrasives.com
The center line of the upper and lower rollers of the tile press machine shall be on the same plane line. The center wheel shall prevail. The flatness shall not exceed 1mm.
The gap between each row of upper and lower rollers is equal and the gap deviation is +0.1mm. The bases for the press mills are adjusted using conventional gauges or feeler gauges, sometimes referred to as bed bodies, support frames, shafts, rolls, drive chains, and other components needed to form the structure. The most important requirements of the foundation are: operation, transportation, and rigidity during installation. The flatness, levelness of the top surface used to mount the assembly. Keyways or other components used for rack positioning. The composition and application scope of the lubrication equipment for cold bending lubrication are mainly composed of: complete machine, PLC computer control system, hydraulic pump station system, automatic after-shear system equipment Product features: flat appearance, uniform paint pattern, high strength Durable Application: Widely used in industrial and civil buildings, such as factory buildings, warehouses, garages, hangars, stadiums, exhibition halls, theaters, and other house and walls. Pressure tile machine features: high-level automatic industrial PLC control
To achieve full control of the operation of production, can accurately tile size, production speed.
Color steel equipment has the advantages of operation, maintenance, maintenance, mechanical debugging, easy mold replacement, etc. The color steel tile full-steel structure workshop frame, single-sided color steel plate steel structure workshop, multi-span steel structure workshop, wooden beam factory,
Villa-style color steel plate house with span of color steel plate roof, roof plus layer, large-span factory building, light steel structure ring shed. Color steel equipment - Angle Chi forming machine platen deviation debugging method, such as the board to the right to run, pad left Corner (feed rack), or fall right bottom flat. Color steel equipment to find the center of the first row and the last row, and then tighten the two sides to lock the mother, in the center of the middle wheel before and after pulling a straight line, the upper After adjusting the clearance of the lower shaft, it is possible to adjust the machine along the straight line. The four horns lined up before and after the color machine equipment are consistent from the height of the upper end of the shaft to the upper end of the shaft, and then from the first row to the last row.
, find a line straighten, check if the lower axis is in a straight line and adjust the left and right sides of the lower axis to level
Pressing machine debugging: