In machining, it is often necessary to use a reamer for reaming. Especially when reaming with a new reamer, it is often caused by the tool. This is because the standard cylindrical reamer usually has a diameter of 0.005 to 0.02 mm. The amount of grinding, the roughness of the land is high, and can only be used for the hole with lower reaming precision. If the hole with higher reciprocating precision is required, the diameter of the reamer should be ground to match the size of the reaming hole. The dimensional accuracy. After the reamer is taken, the reaming should be tested. If there is an out-of-tolerance or the quality of the reaming is not good, the actual value of the outer diameter of the reamer needs to be measured and then ground.
Sicis Glass Mosaic
Sicis Glass Mosaic,Iridescent Mosaic,Glass Mosaic Wall Tile
Hundreds Flooring Co., Ltd , http://www.chglassmosaic.com