The star unloader should be started under no load condition, and can be charged after starting. To do this, stop the feeding before stopping and stop the operation after the material in the standby device is completed.
In the operation of the star unloader, the provisions of the articles in the design of the conveyed goods must be observed and the design capabilities of the star unloader must be observed. Each sports organization should be always lubricated: The oil in the 10th car in the reducer of the drive unit must be replaced every three months; the bearing seat must be filled with high-temperature grease. Secondly, attention should be paid to the part of the movement that should not be touched by all kinds of personnel. Non-professionals must not freely touch electrical components, control buttons, etc. Finally, during the operation, it is not possible to open circuit the inverter. If it is necessary to confirm the maintenance, it must be performed when the inverter is stopped. Otherwise, the inverter may be damaged. When the operation stops, press the stop button to stop the system and stop the main power supply.
The star unloader should be started under no load condition, and can be charged after starting. To do this, stop the feeding before stopping and stop the operation after the material in the standby device is completed. In use, the working condition should be checked frequently, and whether the fasteners are loose or not should be observed. If loosening is found, the tightening should be promptly tightened. Pay special attention to whether the bolts of the blade and the fixing plate are loosely dropped or sheared. If it is found that the bolts should be stopped and repaired immediately. After a certain period of operation, if it is found that the amount of delivery can not meet the needs of the work, it should promptly check whether the leaves fall off or wear, if found to be replaced in a timely manner. Any abnormal phenomena found during operation should be checked and corrected, and no forced operation is allowed.
Star unloader bearing seats need to use high-temperature grease; connected to the power supply, check the rotation of the spiral body and the star ash discharge valve is consistent with the direction of the sign, if not consistent, re-wiring, a group of wire exchange wiring. The feeding of the star unloader should be uniform, otherwise it may easily cause clogging of the conveyed material, thus overloading the drive device and damaging the entire machine.
Refrigerator is a kind of refrigeration equipment which keeps a constant low temperature, and also a kind of civil product which keeps food or other articles in a constant low temperature and cold state. There is a compressor or, ice maker for freezing cabinet or box, with refrigeration device storage box.
The characteristic of the products:
1 Ideal chemical inertia and can be widely used in various temperature-controlled heat dissipation occasions;
2 The low boiling point is a very moderate one. There is evaporation in the course of work, which take heat away through the heat of evaporation, thus ensuring the heating parts can work well and stably;
3 Non-dangerous goods, non-flammable and non-explosive, no fire point and flash point;
4 Good electrical insulation, extremely high breakdown voltage above 40KV;
5 The dielectric constant below 2 doesn`t make data lost in data center applications ;
6 Good fluidity, lower viscosity than clear water; Can flow well and dissipate heat in the temperature control system;
7 Nontoxic, harmless, non-irritating;
8 Environmentally friendly, have ODP value of 0 and extremely low GWP value
Refrigerant For Refrigerator
Refrigerator Refrigerant,Cooling Refrigerant For Refrigerator,Refrigerant For Refrigerator,Refrigerant For Refrigerator
Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtech.com