Summer sesame fertilization medication technology

     Summer sesame has a short growth period and requires a large amount of fertilizer. Therefore, it is necessary to use nitrogen, phosphorus, potassium and trace element fertilizers in combination with rhizosphere and root fertilization to scientifically fertilize to meet the needs of sesame for fertilizer. Due to the slow growth of summer sesame seedlings, the ability of roots to absorb nutrients is weak. If the seedlings caused by insufficient base fertilizer are thin, the seedling fertilizer should be applied as early as possible, but the amount of fertilizer used should be small, otherwise it will easily cause high-legged seedlings. However, too much nitrogen fertilizer at the bottom will make the seedlings grow longer and form high-stem seedlings. Therefore, the field of 75-100 kg is generally produced, and the nitrogen and phosphorus ternary compound fertilizer (15-15-15) is 15-30 kg, potassium sulfate. 1 kg, applied to the soil at the time of sowing. Because the sesame root system is shallow at this time, it should be applied as shallow as possible when fertilizing.
     During the flowering period of summer sesame, it blooms, matures and matures at the maturity stage, and the demand for fertilizer increases sharply. The nutrients absorbed during this period accounted for 70%-80% of the total growth period. At this time, the lateral roots have begun to form in large quantities, the absorption capacity of the root system is enhanced, the growth rate of the plants is accelerated, and the demand for nutrients is also significantly increased. This stage of topdressing can reduce the tip of the yellow tip and the grain, and increase the weight of 1000. Generally, the flowering season should be early, and should be applied twice: 10 days after the initial flowering, 2 to 3 kg of pure nitrogen can be applied per mu, and 3 to 5 kg of pure nitrogen per mu can be used after 10 days of crusting. . In order to meet the large demand for phosphorus and potassium in the flowering period, 2 kg of phosphate fertilizer can be used per mu, 1 kg of potassium fertilizer, 50 kg of water, and the supernatant is sprayed after mixing, and the effect is very good.
     When fertilizing sesame seeds, generally 10 cm away from the sesame plant, the ditch strips are applied or applied, and applied to a soil layer 10 cm deep to absorb the roots and apply the soil after application; according to the test, the same fertilizer is applied per acre. The shallow application (10 -15 cm) is about 10% higher than the deep application (25 cm). In the case of spreading, the decomposed cake fertilizer or granular urea can be mixed with soil, and then cultivating the soil to cover up the soil. When the weather is dry, water should be sprayed after application to fully exert the fertilizer effect. In the flowering period from the beginning to the full bloom, root dressing can also be carried out. For example, in the sunny afternoon, the fertilizer is 0.3%-0.4% potassium dihydrogen phosphate or the like, which is more easily absorbed by the sesame.
The herbicide residue of the former herbicide is the improper use of the herbicide in the wheat field. The herbicide used in the field of wheat rice is misused, such as metsulfuron-methyl, chlorsulfuron-methyl and its compound preparations. These herbicides not only harm sesame seeds, but also It is harmful to soybeans, peanuts, corn and other crops. Therefore, it should be banned in non-wheat rice rotation areas. Second, it is too late to use some herbicides with long-lasting effect in spring wheat fields, especially when the dosage exceeds the standard, and the spring dry weather. The residual amount of herbicide residues in the soil is large, so when sesame seeds are planted in summer, phytotoxicity occurs. When the quaternary phytotoxicity is mainly caused by farmers using ground-sealed herbicides such as acetochlor in sesame fields, in order to improve the herbicidal effect, the dosage is too large, causing some sesame seedlings to be yellow, thin, or even dead, so use closed at the time of sowing. When using herbicides, be sure to use the proportion of pesticides, and do not use them excessively to avoid the occurrence of harmful substances.

PC Tri Proof Lights

PC Tri proof lights, as its name shows, is made of PC material with a fire rating of 94V0. Litehome uses pure PC material. Compared with the PC material doped with ABS, the tri-proof lamp of pure PC material has better light transmittance and stronger anti-fall ability. Of course, pure PC material is more expensive than PC material doped with ABS. Not only that, our LED Tri-proof Light protection grade is IP66, which is waterproof, dustproof, anti-corrosion, and anti-UV. Meet the requirements of international food safety IFS, BRC and HACCP. It is very suitable for outdoor lighting and places where there is a lot of dust and need to be cleaned frequently. Such as: parking lot and food processing products.

led tri proof lightsPC Tri proof lights

Tri Proof Light Led,Ip66 Batten Light,Vapour Proof Lights,Led Light Garage,Waterproof Lighting,Weatherproof Batten Light

SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com