The importance of bearing work clearance

Source: China Bearing Network Time: 2014-06-18

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Work clearance is an important quality indicator for rolling bearings; it is also an important parameter in the use of bearings. In actual use; the bearing clearance of the bearing will affect the load distribution, oscillation, noise, collision torque and life in the bearing. Especially at high speed In the joint reducer; once the bearing clearance adjustment is not suitable; the gear will run unstable and oscillate; damage the meshing effect of the gear; increase the fatigue of the gear. Even when the outer ring of the bearing changes; Wear; the increase of the pitch in the gear and the backlash of the gear; cause the tooth to break.

Recommend to friends comments close window

Bearing related knowledge

Railway bearing quantitative grease machine analysis: the seal of the bearing itself
SKF single row tapered roller bearing minimum load
NTN bearing timing protection and routine inspection for the layout of extended life
Factors affecting KOYO bearing oscillation

This article links to http://
Please indicate the bearing network http://

Previous:[å›¾]Automobile common sense full touch four starter layout and protection Next: Analysis of sealing skills of bearings themselves

It is widely used in general ropes, transportation, fishery, petroleum, metallurgy, agriculture and other industries,Important economic value.The twisted rope should be melted and bonded at each end to prevent loosening.

t should be noted that the nature Manila Rope will shrink when it is wet with water, so the new rope is usually immersed in water and dried before use, so the shrinkage rate is lower than the shrinkage rate when the rope is never wetted, so you need to consider it when using it. To this point.

Manila Rope

Manila Rope,Manila Hemp,1 Inch Manila Rope,Twisted Manila Rope

Baoying Yiliyuan Rope And Net Co.,Ltd , https://www.ylyropes.com