What are the types of wallboards?

What are the types of wallboards you know? Wallboards are mainly used to decorate walls. Most of them are man-made wallboards . So how do you know about these man-made wallboards ? Let’s look at them today. What are the types of wallboards and ways to clean them daily?

What are the types of wallboards ?

Foamed cement composite board

Foamed cement composite board has been called the Chinese version, and it is still good in terms of environmental protection and energy conservation. Energy-saving and pollution-free are comparatively lightweight, anti-seismic and waterproof, heat-insulating and sound-insulating, etc. Therefore, they are mostly used in construction.

2. Roof plate, grid plate

The roof panel grids are mainly used for large-scale houses, and venues and factory warehouses are used.

Floor plate

Floor plates are mainly used for steel structure floors and frame structure floors. This plate is mainly due to steel beam welding, which has good solidity and integrity.

4. Paper gypsum board

The composition of the gypsum board is mainly the building material gypsum is added with fiber, so that the plate itself is more light. There is a type of gypsum board with fireproof paper added, which can remain unbroken for a certain period of time when it is burned under a high-temperature open flame. Gypsum plasterboard is mainly used for interior partitions and suspended ceilings.

5. Gypsum hollow strip

Gypsum hollow strip production methods are similar to ordinary concrete hollow slabs. Fibers or lightweight fillers are often added during production to increase the flexural strength of the board and reduce its own weight. This kind of board is mostly used for the partition wall of a residential house.

Second, the daily cleaning method of the wall

Rust stains

Rust stains This stain Many people use oxalic acid for cleaning. After cleaning the traces again with clean water, there is another way to crush the vitamin c pieces, spread them on the surface with rust, and wipe them with water several times. , so that the rust is cleared.

2. Grease stains

Grease stains are more likely to appear on the walls of our homes. If they are accumulated over time and result in very thick oil, you can use some tools to clean them, use acidic cleaners, and if soap stains on the bathroom walls, Can be washed with warm water first, until it dissolves, then slowly erase with a brush.

3. General stains

Ordinary general stains cleaning method is still relatively simple, only need to wipe the traces with a soft cloth can be dry, if there are some more difficult to clean the stains, then you can use a dry cloth repeatedly wipe, do not underestimate this method This is the best way to achieve this effect. In addition, the windows and doors should be opened after cleaning to make the air flow.

Concluding remarks: The above is the introduction of relevant knowledge for wallboards .   Wallboard   The type is still many, looked on   Face to face, I believe you have more understanding of the wallboard .   Solve this situation, you can choose to fit your own wallboard in the next decoration Oh! Hope that the above introduction can help everyone.  

Wallboard

Cutting mode: Laser cutting

Suit material: carbon steel, alloy steel, galvanized plate, stainless steel, copper plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet matal.tube stock.

1.Product describe

Our company have both CO2 and Fiber laser machines. They can cut various type of metals such as aluminium, mild steel and stainless steel. Fiber laser machine can even cut brass and copper. These machines can cut various profiles with smooth and high quality surface finish.

Fast cutting spead, high working efficiency and high stability, it is a high-tech equipment that set one of fiber laser technology, CNC technology and high-tech equipment.

2. Product features

Imported with original packaging servo motor and reducer, bilateral drive, high operating speed and high precision.

Can remote operation, convenient and efficient, save labor.

Imported cutting head, optical glass, focusing is convenient and cutting perfect.

Fiber transmission, no need to adjusted the optical circuits, focal spot is more smaller.

Adopted auto lubrication system, auto dual-temperature control syatem, convenient and efficient.

High precision grinding guide rail, gear and rack, precision class up to ±0.02mm.