Analysis of Inspection and Discrimination Methods for NSK Bearings

Source: China Bearing Network Time: 2014-01-21

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Determine whether the removed bearing can be reused; check after the bearing is removed; carefully check the raceway surface, the rolling surface, the condition of the cooperation surface, the wear condition of the cage, whether the bearing clearance can be added, and whether the scale accuracy is reduced. Damage, abnormal. Non-detached small ball bearings, etc.; use a single-handed flat end inner ring; rotating outer ring acknowledges whether it can be smooth.
Tapered roller bearings and other separate bearings; can be viewed from the rolling surface of the roll and outer ring.
Large bearings can not be rotated by hand; pay attention to the appearance of the rolling body, raceway surface, cage, ribs, etc. The higher the importance of the bearing, the more careful it is to view.
Determine whether the bearing can be used again; according to the degree of damage of the bearing, mechanical properties, importance, working conditions, viewing cycle, etc., the correlation is determined. However, if the following defects are found during the inspection; the bearing cannot be used continuously; the new bearing needs to be replaced. .
(a) There is a crack or a gap in the inner ring, the outer ring, the roll body and the cage.
(b) One of the ferrules and the rolling body is cracked.
(c) Significant abrasions on the rolling surface, ribs and roll.
(d) The cage is worn significantly; or the rivet is significantly loose.
(e) There are rust or scars on the raceway surface and the roll body.
(f) There are severe indentations or bumps on the raceway surface and the roll body.
(g) There is significant creep on the inner diameter surface of the inner ring or the outer diameter surface of the outer ring.
(h) Significant discoloration due to overheating.
(i) Bearings sealed with grease; seals or dust caps are severely damaged.

Recommend to friends comments close window

Bearing related knowledge

Several plastic bearing analysis tips - how to take the bearings?
The application of skf bearing "high-rigidity bearing" in petrochemical industry

This article links to http://
Please indicate the bearing network http://

Previous: Bearing professor teaches you to look at and deal with the problem of INA bearing Next: Wind energy occupation demand for SKF bearings

Musk Ambrette, Musk Ketone and Musk Xylene have a long history of use as fragrance ingredients, although musk ambrette is no longer used in fragrances.

As part of the review of the safety of these uses, it is important to consider the systemic exposure that results from these uses.

Offer Ambrette Musk,Musk Ambrette Synthesis,Musk Essential Oil From China Manufacturer

112

Ambrette Musk

Ambrette Musk,Musk Ambrette Synthesis,Musk Essential Oil,Musk Pod

Gan Su Original Flavor Co.,ltd , https://www.muskxylol.nl