Cause Analysis and Solution of Main Film Sticking Mold in Injection Molding
Reasons and troubleshooting methods for mainstream mold sticking during injection molding: (1) The cooling time is too short and the main channel has not yet solidified. (2) The slope of the main flow channel is not enough, and the draft angle should be increased. (3) The mismatch of the size of the main channel bushing and the nozzle causes leakage. (4) The mainstream road is rough, and there is no cooling well in the mainstream road. (5) If the nozzle temperature is too low, the temperature should be raised. |
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Outdoor Led Wall Light,Brass Outdoor Led Wall Light,Outside Light Fixtures,Outdoor Motion Sensor Light
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com