Natural Stone Veneer,Micro Fine Cement,High Strength Concrete,Construction Materials Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com
In order to ensure the quality of the turntable (Fig. 1) production, our factory designed the fixture used on the ordinary lathe to process the spiral end face between φ84 and φ86mm. The jig is composed of two parts, the moving part is installed between the main shaft and the top end of the tail frame, and the cam part is composed of the angle iron support 1 (Fig. 2) and the cam sleeve 5. In the same manner as the centering frame method, the angle iron support 1 is fixed at a proper position on the lathe rail, and the bearing 3 is mounted in the spiral groove of the cam sleeve 5. The bottom of the mold sleeve 5 has splines at both ends