Digital display electronic tensile testing machine technical indicators I, the main purposes:
The digital display electronic tensile testing machine is suitable for tensile testing of rubber, plastic, textile, waterproof materials, wire and cable, net rope, wire, metal rod, metal plate and other materials. The attachment can be used for compression and bending tests. With the test force digital display, the test speed is continuously adjustable, the sample is automatically disconnected from the break, and the peak is maintained.
Features and features:
1. Adopt high-precision, all-digital speed control system and precision reducer to drive the precision screw pair to test, realize the wide range adjustment of test speed, low noise and stable operation during test.
2. The universal joint adopts the cross pin structure and has the function of swing angle limitation. On the one hand, the sample clamping is facilitated to ensure the test concentricity, and on the other hand, the influence of the irregular sample on the sensor is well eliminated.
3, touch key operation mode, LCD display in real time. The display interface can display the test method selection interface, the test parameter selection interface, the test operation, the result display interface and the curve display interface, which are convenient and quick.
4. It can realize the lifting and lowering of the beam when the sample is clamped, and has protection devices such as overcurrent, overvoltage and overload. .
5. Optional computer interface, external computer can be used to realize the control of the test process and the storage and printing of data.
Second, the main technical indicators of digital display electronic tensile testing machine:
1. Maximum test force: 1000N;
2. Range: 0N-1000N;
3. Test force accuracy; better than ±1%;
4, displacement resolution: 0.01mm;
5, displacement measurement accuracy: better than ± 1%;
6, stretching stroke: 600mm or 1000mm (optional)
7, compression stroke: 600mm or 1000mm (optional)
8, test stroke: 600mm or 1000mm (optional)
9, displacement speed control range: 1mm / min ~ 500mm / min (common configuration)
10. Displacement speed control accuracy: better than ±1%;
11, testing machine level: better than level 1
12, deformation indication error: ≤ ± (50 + 0.15L)
13. Test machine size: 530*266*1450 or 1810 mm
14. Appearance: in line with GB/T2611 requirements
15, complete sets: meet the standard requirements
16, protection function: the test machine has overload protection
17, power supply: 220V, 50Hz
18. Weight: 150kGhttp://news.chinawj.com.cn Submission:
The spunbond process is considered the fastest manufacturing method for nonwoven fabrics. As a result, spunbonding is considered to be more economical than other manufacturing methods such as needle punching staple fiber. During the spunbonding process extruded filaments are spun onto a collecting belt and bonded by applying heated rolls .
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.