The world's first adjustable spot LED fluorescent leak detector LUYOR-3130 is Luyor's latest UV lamp with UV LED light source. The cold light source, working continuously for 2 hours, has a temperature of only 40 degrees, which is far lower than the high temperature of Baidu on the traditional high-intensity fluorescent leak detector lamp, which brings great convenience to the operator. The LUYOR-3130 UV Flashlight is suitable for fluorescent leak detection. Luyor-6100 fluorescent tracer is added to the liquid circulation system to be tested and circulated; then, the fluorescent LUYOR-3130 UV flashlight is used to illuminate the components in the circulation system. As the system operates, the luyor-6100 fluorescent tracer will quickly penetrate into all the leaks. Under the illumination of the LUYOR-3130 UV flashlight, the leak will glow bright yellow-green. The luyor-6100 fluorescent tracer can be left in the system without any damage to the system or affecting system performance.
Flashlight LED Fluorescent Leakage Lamp LUYOR-3130 for Fluorescence Detection
Penetrant testing is also known as PT (Penetrant Testing) or LPT (Liquid Penetrant Testing). Regardless of the material of the test object, it is possible to perform surface inspection on almost any product or material. The PT uses capillary phenomenon to infiltrate the liquid into the narrow defect portion, and then sucks the infiltrated liquid back to the surface, and uses a simple principle to perform flaw detection. The osmotic flaw detector is used in combination of three kinds of agents: a permeate (P), a developer (D), and a cleaning solution (R). Usually in accordance with (1) pre-treatment - (2) infiltration - (3) removal - (4) ultraviolet lamp illumination - (5) observation - (6) post-processing sequence.
The permeate has a red dyed permeate and a fluorescent permeate that produces fluorescent light under an ultraviolet lamp. The developer includes three kinds of water-dispersible developer which diffuses in water, a powdery dry developer, and a quick-drying developer which is suspended in a solvent and sprayed in a can. The cleaning solution is removed for pre-cleaning, residual permeate removal, and post-cleaning after flaw detection.
Flashlight LED Fluorescent Leakage Lamp LUYOR-3130 is suitable for clean room particle inspection LUYOR-3130 filter filter produces 365nm wavelength UV light. This band has good recognition effect for any dust (such as PCB fiber, resin, etc.), water stains, oil stains and some foreign matter that is easy to electrostatically adsorb. It can be easily recognized by the operator. Come out and clean it with a dust-free cloth.
Because the manufacturer often uses the purple particle detector to check the dusting situation of large equipment, it is desirable to reduce the weight or volume of the machine because it is difficult for people to enter and exit. In view of this, the company has officially launched a lightweight flashlight-type violet particle detector to greatly enhance the convenience of use.
The LUYOR-3130's light and compact size makes it easy to check the narrowness of the internal pipe of some machines.
Flashlight fluorescent leak detector LUYOR-3130 is suitable for criminal investigation
Ultraviolet light can simplify the reconnaissance of body fluids in criminal investigation science. Most body fluids can be seen under the action of high-intensity ultraviolet rays, because body fluids have the characteristics of natural fluorescence reflection. At complex criminal investigation sites, high-intensity ultraviolet lamps can be used to find valuable traces in a simple and uncomplicated way. Under the excitation of high-intensity ultraviolet energy, the fluorescence reflection of these body fluids can be directly seen by the human eye. Although this method does not directly confirm which type of body fluid is found, by using a high-intensity ultraviolet lamp for long-distance large-area search, it can directly help you determine where there is evidence of the extracted value, and then you can The place is numbered to provide valuable evidence for the next analysis.
LUYOR-3130 Fluorescent Leak Detector for nucleoside cleaning in pharmaceutical plants. Verification of riboflavin is very sensitive to 365nm UV. The high-intensity 365nm LUYOR-3130 Fluorescence Leak Detector can excite the intense yellow-green color of riboflavin. Fluorescence. Therefore, to do riboflavin cleaning verification, you must purchase LUYOR-3130 fluorescent leak detector, but not all fluorescent leak detectors, because the fluorescent leak detectors are different, the UV power is not the same, it is recommended to purchase high strength Fluorescent leak detector for the 3130 flashlight. Remind everyone that the fluorescent leak detector used in the cleanup test can't be replaced by a violet light. Because the violet light has a wavelength of 400 nm, and riboflavin reacts to the black light of 365 nm, it is necessary to use a 365 nm fluorescent leak detector. The effect and power of the fluorescent leak detector lamp are not directly related. The UV output power of the fluorescent leak detector lamp is not the UV power of the UV lamp. The LUYOR-3130 fluorescence leak detector has an electric power of only 5w, but the UV output intensity is as high as 20000uw. /cm2, the UV intensity of a 100W traditional high-pressure mercury lamp type fluorescent leak detector is more than four times. Fluorescent leak detection cleaning verification step is to uniformly coat riboflavin on the inner surface of the device, dry; start CIP cleaning according to the predetermined SOP; dry; use LUYOR-3130 fluorescent leak detection lamp; eligibility standard: no core The flavin residue has no fluorescence under the LUYOR-3130 fluorescence leak detector.
Http://news.chinawj.com.cn Submission:
FEATURES:
Light weight; good elasticity, weather resistance; long serving life.
PRESSURE REQUIRED:
|
I.D.
(inch/mm)
|
Working Pressure
(Bar / Mpa / Psi)
|
Bursting Pressure
(Bar / Mpa / Psi)
|
|
1``
|
25
|
13 upto 25
|
1.3 upto 2.5
|
190upto365
|
39upto75
|
3.9upto7.5
|
570 upto1090
|
|
1-1/4``
|
32
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
1-1/2``
|
38
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
1-3/4``
|
45
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
2``
|
52
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
2-1/2``
|
64
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
2-3/4`
|
70
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
3``
|
75
|
8 upto 25
|
0.8 upto 2.5
|
120upto365
|
24upto75
|
2.4upto7.5
|
350 upto1090
|
|
4``
|
102
|
8 upto 16
|
0.8 upto 1.6
|
120upto235
|
24upto48
|
2.4upto7.5
|
350 upto700
|
|
5``
|
127
|
8 upto 13
|
0.8 upto 1.3
|
120upto190
|
24upto39
|
2.4upto3.9
|
350 upto570
|
|
6``
|
152
|
8 upto 13
|
0.8 upto 1.3
|
120upto190
|
24upto39
|
2.4upto3.9
|
350 upto570
|
APPLICATIONS:
Fire-fighting; Shipping; petroleum; Chemical industry; Agriculture; Mining
Color available:white;red;yellow; or as per customer`s instruction
STANDARD:GB6246,EN14540,UNI9487; or as per customer`s instruction
STANDARD LENGTH:10M up to 40M
Synthetic Fire Hose
Synthetic Fire Hose,2`` Fire Hose,Synthetic Rubber Fire Hose,Fire Hose For Fire Cabinet
NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehosefactory.com