Fingerprint attendance machine how to change the time fingerprint attendance machine export data operation instructions

Fingerprint attendance machine how to change the time? Fingerprint attendance machine how to export data? Fingerprint attendance machine how to set up to use? Fingerprint attendance machines are widely used in day-to-day management of companies. As a personnel or manager, it is very necessary to be familiar with the operation and use of the fingerprint attendance machine, which can greatly improve the work efficiency. This paper mainly introduces the use of the fingerprint attendance machine and explains the basic operation methods. c7N smart lock China

Picture 1.jpg c7N smart lock China

How to change the time of fingerprint attendance machine

There are two methods for adjusting the time of the fingerprint attendance machine. The specific operations are as follows: c7N Smart Lock China

1, the fingerprint attendance machine and computer software connection, connection methods are USB, RS232 or RS485, TCP / IP methods. c7N smart lock China

After the software displays the “Connected Successfully” prompt, click on “Device Management” to enter the device management interface and click on “Synchronize Time on Time Attendance” to adjust the time. c7N smart lock China

2, in the fingerprint attendance machine interface to operate, press MENU-system settings - time settings, adjust the machine system time, the operation is successful, click OK. c7N smart lock China

If you are exporting the check-in time, how to modify it? The following is the operation to modify the export record time sheet Excel time: c7N smart lock China

Open the Excel form through the office software, you can see the employee's check-in time and frequency, modify the form will prompt the protected file: Can not modify the protected read-only cell on the protected worksheet. c7N smart lock China

View the toolbar, click "Review" and select "Undo Worksheet Protection". Double-click the data you want to modify. c7N smart lock China

The amendment is that the employee's attendance record can be supplemented by the system replacement card. c7N smart lock China

Picture 2.jpg c7N smart lock China

Fingerprint attendance machine export data operation setting method

1, because the fingerprint attendance machine is to use USB cable to download data, so first in the attendance software "equipment maintenance" in the attendance machine and software "communications" set to USB download, and then click Save. c7N smart lock China

2. Then power on the attendance machine, insert the USB cable into the attendance machine and the USB interface of the computer, select “USB connection method” in the “My Device List”, and then connect the device, wait a few seconds, the device is connected successfully, at the same time The circle of the device name will be colored, and at the same time, the system will prompt successful connection in the lower right corner, and the attendance machine and the computer software will be connected successfully. c7N smart lock China

3. After successful connection, click "Download Record Data from Device". At this time, the data in the attendance machine will be uploaded to the software through the data cable. At the same time, there are tips for how many records to download. Then click "Attendance Record" to see All attendance record data downloaded. c7N smart lock China

Note: To determine what your data transmission mode is, common is USB, RS232 or RS485, TCP/IP, etc. c7N smart lock China

Pay special attention to the settings; if it is a U disk, then insert the U disk attendance opportunity on the attendance machine to automatically discover the hardware, and then follow the prompts to operate, generally automatically generate the EXCEL form. The specific operation shall be based on the operating instructions of the brand attendance machine. c7N smart lock China

The above is the smart lock China Network Xiaobian finishing the release of the fingerprint attendance machine modification time and export data operation setting method, more relevant methods of use, please refer to this site article! c7N smart lock China

T300 Joint Wrap Tape tape series is designed for corrosion protection of straight pipes, fittings, flanges valves,

bends, elbows, carbon steel pipes and other irregular configurations.
Joint wrap tape be made of a stabilized PVC carrier film, coated on one sides with a permanently plastic
synthetic compound on Butyl rubber compound bitumen base.



Description

Pipe Wrap Tape is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Pipe coating tape will protect the pipe and its anti-corrosion tape surface from pipeline damages. Xunda high quality pipe wrap tape coating tapes have been specially developed for high-quality, corrosion protection for joints, in cases where the pipeline has already been installed. The material is easy, safe and quick to apply on welded joints, bends and other complicated shapes.

Usage

l Provides long-term anticorrosion to steel pipelines.

l Repair of damaged factory applied corrosion protection and anticorrosion to pipe surface

l Outlining weld beads and cut backs prior to wrapping bare-welded joints.

l Outlining seams on spiral and seam welded pipe.

Features & Benefits

l Excellent adhesion to a wide range of industries, steel piping.

l Effortlessly applied with no special equipment (mouldable by hand).

l Compatible with common pipe coatings

l Endures extremes of heat and cold.

l Excellent resistance to cathodic disbondment.

l High water and vapour impermeability.

l Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068

Main market

· Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Bengal,Pakistan,

· Uzbekistan,India,Australia,Indonesia,Kazakhstan,

· Ecuador,Venezuela,Bolivia,Argentina,

· Uruguay,Malaysia and so on.

Material:

Polyethylene backing

Butyl rubber adhesive

Payment:

T/T , L/C,Western Union,Money Gram,Cash

MOQ:

500 roll

Shipment port

Qingdao or Shanghai port

Package:

12 rolls,6 rolls,4 rolls

Sample leading time:

about 5 days in the free season,may be 8 days in the busy season.

Delivery time:

10 days after the order confirmed,and it depends on the quantity of the order.

Brands:

OEM or ODM, we can provide as your requirements,

including your design/size/material/weight/Logo/package and so on.

Ordering Information

Tape Coatings are available in roll form.Ordering

Example: T100-20 WHT6X100FT 3``

20




Tape thickness

20 mils (0.508 mm),25 mils (0.635 mm)

WHT

Tape color

Black (BLK), White (WHI), Blue (BLU),GREEN(GRN)

6

Tape width

1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm),

200FT

Tape roll length

100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m)

3

Tape core diameter

1.5" (38 mm), 3" (75 mm)


112




pipeline Joint Tape

Self Adhesive Tape, Joint Coating Tape, Welding Wrapping Tape, Field Joint Tape

Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com