Q: What if the reel has a beating phenomenon? A: Adjust the three-point centering bearing and touch the reel at the same time. Q: What should I do if the main motor does not turn? A: The solution is: 1. Reset the emergency stop button. 2. Turn on the three-phase power supply and check that the main circuit is loosely connected. 3. Repair or replace the variable frequency start button switch. Q: What should I do if the auto-correction power indicator is off and the indicator is off? A: Replace the 1a fuse. Q: What if I don't have automatic correction and there is no automatic manual operation? A: The solution is: 1. Replace the 5a fuse. 2. Refer to the instructions for automatic deviation correction. Q: What should I do if I am going to correct the deviation? A: The solution is as follows: 1. Refer to the instructions for automatic correction. 2. Provide unwinding materials according to the requirements of correcting the use. Q: What should I do if the winding paper core is tightened? A: Adjust the appropriate winding tension. Q: What should I do if the cut and the volume are not aligned? A: The solution is as follows: 1. Replace the paper core that meets the required inner diameter. 2. Use the winding roller during the winding process. Q: What should I do if the winding roller has no action? Answer: The solution is as follows: 1. The air supply pressure is 4-5kg/cm2.2, and the air switch is replaced. 3. Re-adjust the throttle valve. Q: What should I do if the ear fan does not turn? Answer: The solution is as follows: 1. Reset the thermal relay to restart. 2. Restore the three-phase power supply 380V. Q: What should I do when I unwind the material? A: The solution is: 1. Adjust the appropriate unwinding tension. 2. If high-quality slitting is required, the requirements for the slitting material itself should be correspondingly high. Q: What should I do when I cut the material? A: The solution is: 1. Adjust the appropriate winding tension. 2. Rewinding and using the pressure roller and wrapping the material into the pressure roller before entering the winding paper core. Q: What should I do if the meter count is not allowed? Answer: The solution is as follows: 1. The meter wheel is double-contacted with the feeding rubber roller at the same time. 2. Make a mark on the meter wheel and shake it 5 times to count 1 meter or replace the meter. Q: What should I do if the tension is not stable? A: The solutions are as follows: 1. Eliminate mechanical failures. 2. Add a new magnetic powder of 5g to the brake or clutch when the tension current is large and the tension is not reached. Q: What should I do without tension? A: The solution is as follows: 1. The tension switch is placed in the "ON" position. 2. Adjust the tension to rotate to the proper position. 3. Adjust the proximity switch and the detection block to 2--3<>mm. 4. Replace the magnetic powder power amplifier. 5. Replace the magnetic powder brake or clutch and reconnect the cable. 6. Replace the proximity switch. PVC Wire: PVC wire, also known as PVC coated wire, refers to a type of wire that has been coated with polyvinyl chloride (PVC) material. The PVC coating provides insulation and protection to the underlying wire, making it resistant to corrosion, moisture, and abrasion. PVC wire is commonly used in various applications, including electrical wiring, fencing, and craft projects. It is available in different gauges and colors to suit specific needs. Pvc Wire,Coated Wire Mesh,Pvc Coated Galvanized Wire,Green Pvc Coated Wire Hebei Aibuer trading co., Ltd , https://www.ablewiremesh.com
Coated WIRE MESH: Coated wire mesh refers to a wire mesh that has been coated with a protective material to enhance its durability and resistance to environmental factors. The coating can be made of various materials, such as PVC, polyethylene, or zinc. Coated wire mesh is used in a wide range of applications, including fencing, animal enclosures, garden protection, and filtration. The coating provides added protection against corrosion, rust, and wear, increasing the lifespan of the wire mesh.
PVC Coated Galvanized Wire: PVC coated galvanized wire is a type of wire that has undergone both galvanization and PVC coating processes. Galvanization involves applying a layer of zinc to the wire to protect it from corrosion, and the PVC coating is then applied to further enhance its resistance to moisture, chemicals, and abrasion. PVC coated galvanized wire is commonly used in outdoor applications, including fencing, construction, and agricultural projects, where durability and corrosion resistance are essential.
Green PVC Coated Wire: Green PVC coated wire is a specific type of PVC coated wire that is coated with a green-colored PVC material. The green coating provides an aesthetic appeal and blends well with natural surroundings, making it a popular choice for garden fencing, plant support, and other decorative applications. The PVC coating also offers protection against corrosion and weathering, ensuring the longevity of the wire in outdoor environments.
These different types of coated wires, including PVC wire, coated wire mesh, PVC coated galvanized wire, and green PVC coated wire, offer enhanced protection, durability, and aesthetic options for various applications. The specific choice depends on the intended use, environmental conditions, and desired appearance.