Is a thermostatic shower shower handy?

Most of the friends will install a shower in the bathroom. To know that using a rain shower is both healthy and fast, we know that the types of showers on the market are various. The effect brought by different varieties is still very different. . The following Xiao Bian will introduce to you the thermostat shower and shower shower maintenance tips.

Is a thermostatic shower easy to use?

1. It has a constant water temperature that can quickly lock the water temperature and maintain the user's favorite. It improves the safety and comfort of the shower. It also avoids the use of ordinary showers caused by water pressure or hot water sources. The temperature of the water that may be present in the shower occurs.

2, thermostatic faucet It is through the leading thermostatic regulating spool, and it is also in a very short period of time automatically balance the water pressure of cold water and hot water, in order to maintain the stability of the water temperature, no manual adjustment .

3, anti-scaling coating: When the water quality is poor, the proportion of calcium ion is large, so that the faucet is the scaling will occur (the common faucet with a long time will appear to be difficult to pull the handle, the flow of the water becomes smaller, these It is caused by scaling inside the faucet. If you use a thermostatic faucet with an imported thermostatic valve core, the valve core uses special materials. No scale will be produced on the surface of our valve core. In time, it will not affect long-term use. Product performance.

4. Safety: The thermostatic faucet will automatically shut down in a short period of time when it is lost in hot weather (water stoppage). It will not cause the user's scald to be too high (or too low) when the water temperature is too high (or too low). And discomfort.

Shower maintenance tips

1, first of all to ask experienced professionals to carry out construction and installation. When installing, the shower should not collide with hard objects as much as possible. At the same time, cement, glue, etc. must not be left on the surface, and the surface plating luster will not be damaged. Special attention should be paid to removing the debris in the pipeline before installation, or it may cause the shower to be blocked by pipe debris, which will affect your use.

2, in the case of water pressure not less than 0.02mPa (ie 0.2kgf/cm3), after using for a period of time, if you find that the amount of water decreases, or even water heaters turn off and so on, then this time will be to shower Gently unscrew the sieve cover at the outlet to remove any impurities so that it can be restored.