The safety shoe compression tester measures the compression resistance of the toe cap and the puncture resistance of the steel mid-plate to prevent accidental injury to the wearer when wearing it in the workplace due to insufficient safety performance of the shoes. The product has a speed control function, the test speed can be arbitrarily adjusted according to customer requirements, and has three units of kg, N, lb can be arbitrarily switched function, and with a micro-printer, the test results can be printed out.
Safety shoes compression testing machine technical parameters:
1. Host structure: desktop, can control the compression speed, real-time display of the steel head compressive stress value, displacement and so on.
2. Pressure range: 20000N, (EN) 15 ± 0.1KN, (ANSI) 1000 ± 50 ~ 10000 ± 50lbs
3 pressure sensing accuracy: load ± 0.1%
4. Pressure display resolution: 1/10000.
5. Platen hardness: 60HRC.
6. Puncture steel nails: (4.5 ± 0.05) mm in diameter, with a truncated tip and a tip with a hardness of at least 60 HRC. Meet the requirements of ISO20344, ANSIZ41 and LD50.
7. Test speed range: 5 ~ 500mm/min adjustable
8. Test speed: compression speed (10 ± 3) mm/min
Puncture speed (5±2)mm/min
9. Displacement display: 0.01mm
10. Unit conversion: three units of kg, N, LB can be switched
11. Power: AC Motor + Reducer
12. Host function: the pressure reaches the set value can automatically stop; there is an upper limit protection and peak retention function, can automatically stop.
13. Volume: about 712×330×828mm
14. Weight: about 115kg
15. Power: 1 ∮, AC220V
Fluorescent Coating,Organic Resin Kit,Fluorescent Coating Films,Ethylene Glycol Diacetate