Wall leveling guide

Leveling the wall , at first glance, doesn't seem to help, but it actually gives your family's face value. If the wall is uneven, local chromatic aberration will appear after painting, which affects the overall appearance. Well, leveling walls should be how to do it? What are the types of walls leveling it? Now, Xiao Bian to tell you about how Wall leveling!

1. Types of wall leveling

Nowadays, in home decoration, there are three ways to level the wall, they are Zhaoshunping, vertical leveling, and founder. Let's introduce them one by one.

1. Find Shunping

Finding smoothness is suitable for unevenness on the same wall beyond the specified range. In terms of data, the error in the flatness of every 2 meters does not exceed 3mm. The construction process of finding smoothness is relatively simple. Simply apply the plaster mixed to the wall with a tool, and then scrape it flat with an aluminum alloy ruler. If the degree of concavity is a bit deep, it is recommended to construct again. The process tests the construction method of the master, and the effect is not good without paying attention.

2. Vertical leveling

The work content of vertical leveling is more complicated than that of leveling. Not only must the flatness of the wall be dealt with in time, but also the double right angle of the wall and the ground must be ensured.

â‘ Managing

It uses gypsum as a base point for construction, and the distance between the two base points must not be less than 2M. The connection of the highest point of each base point must be calibrated with a spirit level so that it can be kept vertical.

â‘¡ punching

It is based on dotting, connecting two base points into a vertical plaster belt, the thickness of the plaster belt is higher than the thickness of the dot. During construction, the eight-character smearing method is adopted, and the width is generally within 50 mm.

â‘¢ Scrape

After completing the second step, it is necessary to use a scraping ruler to level, and the height after the leveling should be level with the base point.

â‘£Leveling

Fill the gypsum between the plaster tapes, using a flat blade to scrape down from the top to level up a little bit.

⑤ Patching

If you want to put it in one time, it is not so easy. Therefore, we have to double check and find that if there is not enough gypsum, we need to add gypsum immediately and scrape it again after completion.

2. Find Founder

The general process of finding Fangzheng is a bit similar to vertical leveling, but the overall requirements for construction are more stringent. The main difference is that there is an additional square line before the first step.

Summary of the article: The above is the whole content of the wall leveling guide and the types of wall leveling . Although the leveling of the wall belongs to the preliminary construction of the decoration, it has a very important significance. Everyone must not lose a large amount during construction. Good decoration, the details must be done a lot!

What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount