What do you think of the floor plan? How to judge good or bad?

When buying a house, the only concern is the lot, price, and apartment type. There is a saying in buying a house that “Of course, look at the type of apartment” means that the unit type is an important criterion for us to buy a house. Therefore, how to look at a house type is a friend of each house buyer. Things we must know. In fact, the floor plan is easy to see, as long as it is not a fool we can read, mainly from the following aspects!

First, open, deep

House type is good or bad. It is very important to open the room and go deeper. Open space refers to the width of the room, generally between 3 and 3.9 meters. The depth refers to the length of the room, generally controlled at about 5 meters. Deep into the deep, open narrow, is not conducive to lighting, ventilation. The general floor plans will be marked with two indicators: deep and open. The two drawn lines are mixed with numbers, such as 4.2 meters and 3.9 meters. In general, the smaller the total value of the depth, the better, and the bigger the better.

Second, the area

Most of the units will be marked with the total floor area of ​​the units, but there is an upward and downward floating error between this data and the standard of actual accommodation. Therefore, the area on many floor plans is marked as approximately how many floors are built, or ≥ signs are used. This is normal. In addition, when looking at floor plan, we must pay attention to distinguish between the building area and the actual use of the area, which requires the salesperson to ask for the number of public places. Subtracting the area of ​​the public housing from the floor area is the actual area of ​​use of the apartment. The smaller the public rental house, the higher the room rate and the more affordable.

Third, proportion, layout

The rationality of a house type does not lie in the size, but the proportion and layout relationship between the various parts of the house. This relationship depends on the designer's grasp of the entire room type and more on the details of everyday life. For example, if the total area is not large, it is common to have only 8 to 9 square feet in the second bedroom. This situation is difficult to avoid in practical use and it is difficult to display. In addition, there are also some units that will open the bathroom directly to the living room, dining room, such a place, when looking at the floor plan, do not think there is a big problem, but in real life may encounter such as indoor air is not Good question. Therefore, when looking at the floor plan, buyers need to carefully study and consider it slowly.

Fourth, dynamic and static dry and wet separation

The general layout of the layout of the units is the "dynamic zone" and "dry and wet separation." The “movement” in the static and dynamic partition type refers to such places as the living room, dining room, kitchen, balcony, etc., which mainly provide people's activities; and the “quietness” refers to a place similar to a bedroom for people to rest; The dynamic and static division is to separate these two kinds of activity venues and achieve mutual non-interference.

Dry-wet separation refers to the separation of the dry space and the area that may be flooded. Dry and wet separation mainly includes separation of bedroom and living room from kitchen, toilet and bathroom, and separation of shower and other areas inside the bathroom.

House effect map