Be careful and tricky to teach you to supervise the construction of solid wood flooring

Now in the season of winter decoration, many people have chosen wooden flooring as the flooring material. The pavement of the floor occupies a large proportion in the future use. How do you require the effect of the pavement when decorating? Some floor sales personnel interviewed by the reporter introduced that the wooden floor must be removed from the packaging before laying, and then dried in a ventilated environment. At least one week was needed to adapt the wood floor to the microclimate from the factory to the renovation site. Then, the construction team should perform the following steps:

<<<Link: Soundless Installation and Acceptance of Solid Wood Floors

1. Clean the ground first;

2. Make sure the ground is dry;

3. Apply a layer of bitumen oil layer. Asphalt oil is sold on the market and there is no need to use bitumen blocks for melting. The reason for this is to prevent moisture and insects;

4. Playing floor, usually with 9 centimeters splint, it is also used 12%. The 9-centimeter plate must be cut into four pieces, with a gap of one centimeter between each piece. Then use steel nails to fix the board and the ground;

5. Laying log flooring. With nails on the four sides of the board, note that only two small dots of white latex can be used on each board. Because the white latex is water-based, too much moisture will cause the wood to arch;

6. Grind the floor at least three times. The second time the polished wood powder should be retained;

7. Fill the gap between the planks with the remaining powder;

8. Apply wood floor oil at least three times.

Flooring