Stainless Steel Faucet,Stainless Steel Kitchen Faucet,Stainless Steel Kitchen Tap,Stainless Faucet Heshan Janno Kitchen and Bath Technology Co.,Ltd , https://www.janno-ks.com
1. Each time the test is completed, the drop arm must be dropped to prevent the drop arm that is reset for a long time to deform the spring and affect the test result. Before each drop, please reset the position motor and stop the rotation; press the drop button;
2. After installation of the new machine to the factory, add a suitable low-consistency oil to the sliding round bar, and do not add rust-preventive oil or high-concentration engine oil and back-pressure type with corrosive oil).
3. If there is too much dust in the oiled place for a long time, please lower the machine to the lower part. Wipe the previous oil and wipe the oil again.
4. Drop the impact of the mechanical equipment, the new machine is used more than 500 times, the screws must be tightened in order to avoid failure;
5. The lifting shaft and chain of the testing machine need to be lubricated regularly;
6. The gear reducer changes oil every six months;
7. All power should be cut off when not working to ensure the lifting shaft is clean;
8. Non-operators must not operate the machine at will.
Second, safety issues
1. This tester is only applicable to three-phase four-wire 380V AC power supply.
2. Do not place flammable objects around the tester to avoid fire.
3. The tester enclosure must be reliably grounded, otherwise there is a risk of electric shock.
4. The incoming terminal of the power supply should be connected with an air switch and contactor with leakage protection above the same capacity so that the power supply can be cut off immediately in an emergency.
5. When the machine is running, do not touch parts other than the control panel with your hand to prevent scratches or crushes.
6. If you need to move the machine, be sure to cool it for 5 minutes before turning it off.
Hengtai Fengke is a professional test equipment manufacturing company. It not only produces drop test machines, but also includes: high and low temperature test boxes, ultraviolet aging test boxes, electric blast drying ovens, vacuum drying ovens, salt spray test boxes and other equipment.
First, maintenance