Take a look at the hardware connectors for panel furniture The hardware connector is the most intuitive quality standard. Good hardware should be able to switch freely, without noise, and without peeling off the surface coating. The hardware of some high-end panel furniture is imported, and the foreign language logo can be found on it. Because the combination of disassembly and assembly is the biggest advantage of panel furniture, the quality of the hardware connectors is very important. Metal parts are required to be dexterous, smooth, and the surface is electroplated, without rust, burrs, etc., and the precision of the matching parts is high. The plastic parts should be beautiful in appearance and bright in color, and the stressing parts in use should have strength and elasticity, and should not be too thin. The opening type connecting piece requires flexible rotation, so that the furniture will be smooth, easy and frictionless during opening use. Selection of panel furniture Look for defects carefully, the quality of the edge banding greatly affects the quality of the furniture. The first is the advantages and disadvantages of the edge banding material, and the second is to pay attention to whether the edge banding is uneven or warped. Good edge banding should fit tightly with the whole plate. Veneer materials have a great influence on the grade of furniture. To touch the surface paint film, the general high-end panel furniture is solid wood veneer, the mid-range is paper veneer, and the price of one-time molding and the surface of the rubber veneer is lower. Among them, the paper veneer has different grades due to different processing techniques. Selection of panel furniture Check carefully whether the edges and surfaces of the decorative parts are evenly coated, whether the bonding is firm, whether the trimming is smooth and smooth, and whether the end surfaces of the visible parts such as the side panels, door panels, drawer panels, etc. are edge-sealed. There is no trace of adhesion on the edge of the well-decorated board. The assembling combination mainly depends on whether the groove at the drilled hole is delicate and tidy, whether the connecting piece is firm after installation, whether there is any gap in the T-shaped seam after the plane and the end face are connected, and whether it is loosened by hand. Selection of panel furniture The furniture market is currently dominated by complete sets of bedroom furniture and office furniture, as well as multi-functional film and television electrical cabinets and other products. The national standards for the main dimensions of furniture have requirements. For example, the closet stipulates that the space depth in the hanging closet should be greater than or equal to 530 mm, the table furniture requires a height of 680 mm to 760 mm, and the clearance height between the bookcase floors should be greater than or equal to 230 mm to 310 mm. Glass Kitchen Cabinet,Kitchen Display Cabinet,Frosted Glass Kitchen Cabinets,Kitchen Glass Cabinet Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulin-oversea.com
For more furniture information , go to http://news.gojiaju.com/
                                             Welcome to provide news interview clues Advertising / News Hotline Turn 8004
Panel furniture now occupies a large market share, and is loved by many people because its plates are not easily deformed and the colors are diverse. The so-called panel furniture refers to furniture made of artificial plates and hardware. Panel furniture is easy to disassemble, save wood, and has a variety of colors. It is a variety developed by the furniture industry. When selecting, we should pay attention to observe the following four aspects: