The drum machine produced by Tengzhou Hongye Electronic Machinery Factory is designed and manufactured for large passenger cars, trucks and engineering vehicles. The computer frequency conversion speed regulation has changed the old boring processing method, shortened the processing time, improved the processing precision, and equipped with special purpose. Scythe. The gong machine hones the surface and hard spots of various brake cymbals, 380V power supply. It is very necessary to do the maintenance work of the machine at ordinary times. ** 1. Always check the oil level in each box of the drum machine. It should be kept at a slightly higher height and the center of the oil mark. When refueling, do not use too much to prevent the oil from spilling out of the box. 2. All parts of the drum machine must be kept clean, and the lubricating parts should be filled with clean lubricating oil as required. 3. Allow the gongs and drums to idle for 5 minutes before each shift to fully lubricate the moving parts. 4. After the long-term stop of the drum machine, when starting the machine again, a small amount of lubricating oil should be added to the gearbox to the upper bearing in the oil tank. 5. All electrical appliances should be kept clean and repaired if damaged. 6. When the drum machine is not in use, pull down the switch and cut off the power. 7. When the drum machine is not used for a long time, it should be coated with anti-rust oil and covered with a protective cover. Http:// |
Full threaded rod produced by wire drawing and thread rolling
threaded rod
Shaoxing Grace International Trade Co.,Ltd , https://www.shaoxinggrace.com