Jingong two models of wheel loaders passed the provincial Science and Technology Department identification

Fujian Jingong Machinery Co., Ltd. undertook the provincial key scientific and technological project "Development of JGM757 wheel loader" and Jinan's independent development project "JGM737 wheel loader development" recently passed the identification of Fujian Science and Technology Department.

The appraisal committee believes that the project products have been tested by the National Engineering Machinery Quality Supervision and Inspection Center, and the technical performance indicators meet the requirements of the national, industry and enterprise standards, and completed the indicators of the provincial science and technology plan contract; the development of these two types of loaders is Successful, with the characteristics of large excavation force, high unloading height, light operation, energy saving, etc., reaching the leading level of domestic similar products.

Shower Door Wipes and Seals

The Most Popular 180 Degree Inline Seal

This PDH Clear 'H' Jamb Seals is for use on 180-degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire 'H' Jamb is made of hard polycarbonate.

The Most Popular Bottom Sweep

Snaps on Bottom of Door

The PDH Clear Bottom Wipe with Drip Rail snaps onto bottom of door. The soft wipes on bottom create a water-resistant seal. 45-degree Drip Rail sheds water back into the shower.

One of Our Best-Selling Polycarbonates

Used for Both Hinge and Strike Jambs

Also Used in 135 Degree Neo-Angle Applications

This Clear 'L' Angle Jamb is used for both hinge and strike jambs. It can be adhered to the wall or a fixed panel using our Clear Very Hi-Bond Tape. It is commonly used as a jamb for neo-angle installations when a clean look is most desired.