Stone paving construction process and related matters needing attention

Natural stone is not affected by the factors such as color, appearance, size and age, and it occupies a special position in the decorative materials. The decorative effect of stone is determined by the entire chain from mining, processing and design to construction and paving. Among these, the one that has the greatest influence on the decoration and decoration effect is the paving process. It can be said that the construction paving is the building that determines the required decoration. One of the most important steps depending on the surface effect.

Most of the problems with the stone's decorative effect failing to achieve its intended goal are not due to the stone itself, but because people do not have enough knowledge of the details of stone paving, causing problems in construction. How can we make the best decorative effect of the stone? Decoration Network tells everyone about the key stone pavement, construction process and precautions.

First, the stone pavement before preparation, construction should pay attention to the problem

1. Please read the instructions on the packing box before stone paving.

2. Stone is a natural product with natural texture and chromatic aberration. It is a normal phenomenon. Such as: There are caves in the cave, sandstone has sand eyes, and the schist is multi-layered. The stone mosaic is made by hand processing technology, so there are natural errors between the particles, and there are natural errors in the gaps between the particles, but does not affect the construction (adjustment can be made during construction).

3, due to the special texture of stone products, to avoid the cement mortar or colored material contamination of the surface, the construction site should be kept clean.

4. Before stone paving, first clean the surface of the stone, make it clean and dry, and then use a plate brush (brush) or roller in the form of a water-soluble anti-seepage agent on the counter, front, and four sides of the stone. For best results, the first layer should be completely infiltrated into the substrate (1-2 hours) and then brushed a second time. After the anti-seepage treatment is completed, it can be paved after at least 24 hours of maintenance.

5, stone pavement should be left when the paving (except bamboo mosaic, etc.).

6, in order to strengthen the adhesion of the firmness and stain resistance, it is recommended to use adhesive paving.

7, light-colored stone, please use light fill agent.

8, slate stone surface is made using a special stripping process, so there is uneven thickness between each piece. Because of its rough surface, fill in with a soft cloth on the surface wipe a small amount of edible oil and then fill in, in order to clear up the filling agent. Note: Fill in with a wet towel while filling, and do not rub after a large area.

9. There are many sand holes on the surface of sandstone products. Apply a wide tape before filling the joints to secure the joints with a drop seam and cover them around. Then, cut the adhesive tape at the crevice and then caulking to prevent the sealant from sticking to the surface of the stone. Clean up.

10, after completion, please find the wax stone conservation.

11. For daily cleaning, do not use acidic cleaners or powder alkaline cleaners to clean the stone.

Decoration Materials Knowledge Renovation Construction Knowledge Plate Decorating Decoration Decoration Mesh Cement Paint Floor Tiles Tile Floor Tiles Ld Tiles