Diamond drill bits include many types of
drilling tools, such as electroplated diamond dilling bits, metal bonded
diamond or CBN drilling bit or core drill bits.
If you would like to drill through hard
materials such as Glass, Stone, pebbles, Precious and Semi-Precious stones,
Ceramic, Tile, Glazed Pottery, Shell, Bone or Fossils, then you will need to
use a diamond drill bit. We offer a complete range for use with your rotary
tool. Diamond Core Drills allow good circulation of water and will stay cooler
whilst drilling. A core drill will cut more quickly than a solid drill
since it is only cutting out a small circle of material.
Kemei produce and aim on different types of
grinding tools, such as aluminum oxide grinding wheel, silicon carbide grinding
wheels, mounted points, Diamond Grinding Wheels, CBN Grinding Wheels and wheel
dressers.
If you need any type of grinding tool or
professional advice about grinding on your workpieces. Don`t hesitate to
contact us!
Diamond Drill Bit,Drill Grinding Tool,Drilling Machine Grinding Wheel,Metal Bonded Diamond Drill Bits Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com
The inherent characteristics of LED lighting fixtures determine that it is the ideal light source to replace the traditional light source, and it has a wide range of uses.
First, the LED small size LED is basically a small chip is encapsulated in epoxy resin, so it is very small, very light.
Second, LED low power consumption LED lighting power consumption is quite low, in general, LED operating voltage is 2-3.6V. The operating current is 0.02-0.03A. This means that it consumes no more than 0.1W of power.
Third, LED long service life Under the appropriate current and voltage, LED's life of up to 100,000 hours.
Fourth, high-brightness, low-calorie LED light-emitting diode manufacturers, LED using cold light technology, heat much lower than ordinary lighting.
Fifth, environmental protection LED is made of non-toxic materials, unlike fluorescent lamps containing mercury will cause pollution, while the LED can also be recycled.
6. Rugged LED lighting fixtures are completely encapsulated in epoxy resin, which is stronger than light bulbs and fluorescent tubes. There are no loose parts in the lamp body. These features make the LED lighting fixtures unbreakable.
High energy-saving: energy-saving energy is pollution-free. DC drive, ultra-low power (single tube 0.03-0.06 watts) electro-optical power conversion close to 100%, the same lighting effect than traditional light source energy saving more than 80%.
Long life: Some LED light sources call it a longevity light, meaning a light that never goes out. Solid cold light source, epoxy resin encapsulation, there is no loose part of the lamp body, there is no weakness of the filament luminescence, heat deposition, light decay, etc., the service life of up to 60,000 to 100,000 hours, 10 times longer than the traditional light source life the above.
Many changes: LED light source can use the principle of red, green and blue three colors, under the control of computer technology so that three colors with 256 gray levels and arbitrary mixing, you can produce 256 × 256 × 256 = 16777216 colors, forming a different light The combination of colors changes, achieving rich dynamic effects and various images.
Li environmental protection: better environmental benefits, there is no ultraviolet and infrared light in the spectrum, there is no heat, no radiation, little glare, and the waste can be recycled, no pollution without mercury elements, cold light source, can be safely touched, belonging to the typical green Lighting source.
High-tech tip: Compared with the monotonous luminous effect of traditional light sources, LED light source is a low-voltage microelectronics product that successfully integrates computer technology, network communication technology, image processing technology, embedded control technology, and so on, so it is also a digital information product. Semiconductor Optoelectronic Devices "high-tech tip" technology, with online programming, unlimited upgrades, flexible features.
With the continuous advancement of large-scale integrated circuits and computer technology, LED displays are rapidly emerging as a new generation of display media. LED lighting fixtures have gradually expanded into the general lighting field and have become a beautiful landscape in modern cities.
The main advantages of LED lighting are the small size of the LED. The LED lighting has low power consumption, long service life, high brightness, low heat, environmental protection, and durability.