What furniture to use for a good furniture sheet to buy small tips: look, smell, ask, cut

Plates, usually made of standard rectangular flat construction materials, are used as components for walls, ceilings or floors. Also refers to forged, rolled or cast metal plate. Divided into thin plates, medium plates, thick plates, special thick plates, usually made of standard rectangular flat construction materials. Well, you know what to do with sheet metal furniture do good? The use of furniture plates, the most basic is to see how the environmental performance of the plate, this issue can not be ignored. Second, we must pay attention to what type of plate is used, which is easy to be deformed and whether the moisture content is up to the standard. Untreated plates are the best and most suitable for use. If you have needs in this area, you may wish to work together with me to do what furniture plate under good understanding of it!

Solid wood panels, artificial board two categories. At present, besides the use of solid wood panels for floors and doors, the panels we use are generally artificially processed panels.

Solid plates, splints, fiberboards, decorative panels, fire boards, etc.

  

As the name suggests, solid wood panels are wood panels made from intact wood. These boards are durable and have natural lines, making them the best choice for decoration. However, due to the high cost of this kind of sheet, and the high construction process requirements, there is not much to use in decoration. Solid wood panels are generally categorized according to the physical name of the panel and there is no uniform standard specification.

Plywood, also known as plywood, commonly known as inline fine core board. Composed of three or more layers of a millimeter thick or thin veneer glue hot repression. Is the handmade furniture of the most commonly used material. Plywood is generally divided into three kinds of plates, 5 PCT board, 9 PCT board, 12 PCT board, 15 PCT board and 18 PCT board of six kinds of specifications (1 PCT is 1 mm).

Decorative panels, commonly known as panels. It is a veneer with a thickness of about 0.2mm, and a veneer with a single-sided decorative effect. It is a special way of plywood, with a thickness of 3%. Decorative panels are currently an advanced decoration material that is different from the oil mixing practice.

Blockboard, commonly known as Daxinban in the row. Daxin board is made of two pieces of veneer and pressed and spliced ​​with wood. The price of the big core board is lower than that of the fine core board, and its vertical direction (differentiated by the core material) has poor bending pressure strength, but the transverse bending strength is high.

  

Particleboard is a thin plate made of wood scraps as the main raw material, then infiltrated with glue and additives are pressed. According to the pressing method, it can be divided into two types: extruded particle board and flat pressed particle board. The main advantage of this kind of sheet is that the price is extremely cheap. The disadvantages are also obvious: the intensity is extremely poor. Generally not suitable for making larger or mechanical requirements of furniture.

Fibreboard, also known as density board, is a wood-based board made of wood fiber or other vegetal fibers, using urea-formaldehyde resin or other suitable adhesives. Adhesives and/or additives can be applied during the manufacturing process. Fiberboard has the advantages of uniform material, small vertical and horizontal strength, and less cracking. It is widely used. The production of 1 cubic meter fiberboard takes about 2.5 to 3 cubic meters of wood, which can replace 3 cubic meters of sawn timber or 5 cubic meters of logs. The development of fiberboard production is an effective way for the comprehensive utilization of timber resources.

Fire board is made of silicon or calcium material as the main raw material, and a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed by autoclave technology made of decorative plates. It is a new type of material that is currently being used more and more, and other uses are not just for fire protection. The construction of the fire board requires a relatively high requirement for glue sticking, and the fire board with better quality is also more expensive than the decorative panel. Fire board thickness is generally 0.8 mm, 1 mm and 1.2 mm.

The line is commonly known as the fine core board and is made by hot pressing three or more layers of 1 mm thick veneer or sheet glue. It is the most commonly used material in hand-made furniture. The splint is generally divided into six sizes of 3mm, 5mm, 9mm, 12mm, 15mm, and 18mm.

Melamine board, the full name is melamine impregnated film coated wood-based panels. It is soaked with melamine resin adhesive in paper with different colors or textures, and then dried to a certain degree of curing. It is paved on the surface of particleboard, medium density fiberboard or hardboard, and it is formed by hot pressing. Decorative plates.

  

The main raw material is gypsum plaster, which is made of additives and fibers. It is light, heat-insulating, sound-absorbing, non-flammable, and sawable. The combination of gypsum board and light steel keel (pressed from plated steel) forms a light steel keel plasterboard ceiling. There are many types of gypsum board, including gypsum board, hollow gypsum board, and there are many specifications in the market. From the current point of view, the use of light steel keel plaster ceilings as a partition, and less used for modeling smallpox.

The artificial leather decorative board is made by the technology of wood chips and plywood by hot pressing and other procedures. Technology wood is made of imported wood processed by high-tech processing. It is characterized by excellent simulation results, complete designs, and a wide variety of products. It is suitable for interior decoration and gives people a feeling of returning to nature.

The so-called solid wood particle board is in fact a board produced by a chipboard process and is a kind of particle board that belongs to a homogeneous particle board.

The scientific name of the homogeneous particleboard is directional structure particleboard. It is a kind of material with small diameter, thinning material, wood core, board skin, branch material, etc. Processed and grown by special equipment 40mm, 70mm, width 5mm, 20mm, thickness 0.3mm, 0.7 The flaky pieces of mm, after drying, sizing, and special equipment, the core plywood pieces are arranged in a criss-cross pattern, and then the man-made board after the hot press forming. The large sub-homogeneous particle board will use the advanced single-channel drying machine to dry the fins. The expansion coefficient is small and the moisture resistance is very good. The fins are oriented with layered pavement, so its internal internal texture is uniform. Ordinary particle board and powdered MDF have strong nail holding force, bending resistance and stability.

 

Furniture plate to do the cabinet with what plate to do a good tatami what kind of plate good scenery furniture wardrobe what plate

 The hot dipped galvanized steel water tank defers to the GB code 92SS177 manufactured new type water tank. The manufacture and the installment of tank have no influence of the construction. There are not needed the welding apparatus, the surface is hot dipped galvanize antiseptic treatment. It's artistic durable, prevents two times pollution to water quality and it beneficial to human health. The water tank meets the construction product standardization, the serration and the factorization request.