What is the tempering coating steel coating formula

Nowadays, coatings are not available on the market. Speaking of coatings, I think everyone can say a lot in one minute, such as waterproof coatings, fireproof coatings, anti-corrosion coatings, anti-mold coatings, powder coatings, and so on. However, my dear friends carefully examined whether there are tempered paints among the paints you mentioned. Tempered paint, when it comes to this term, may be unfamiliar to many friends. Today, we will collect the answers to these questions with questions such as what is the tempered paint remnants tempered paint formulation .

What is a tempered coating

The tempering coating is mainly composed of silica sol and acrylic emulsion, and is formulated as an organic-inorganic composite architectural coating. Through orthogonal test and optimization method to select a more appropriate coating formulation, the coating has better hardness, resistance to washing, chemical resistance and other properties. The paint does not pollute the environment and has a moderate cost, which is in line with the development direction of architectural coatings. It completely overcomes many shortcomings such as poor water resistance, low strength, non-durability, and easy powder dropping of ordinary imitation ceramic coatings. Its hard coating, elegant style, white and glossy, delicate touch, no scratch marks, scrub resistance, bump resistance, no chalking, no cracking, is an ideal indoor new material.

Steel paint is non-toxic, non-polluting and will not endanger people's health. It has completely eliminated the existence of traditional paints such as solvent-based paints, polyurethane paints and other toxic substances that contain a lot of harm to human health - formaldehyde, benzene and other substances.

The tempered coating has a variety of functions, such as anti-insect, anti-corrosion, radiation protection, anti-ultraviolet radiation, sound-insulating and flame retardant, etc., while the traditional coating function is relatively simple.

The performance indicators of tempered coatings are more reasonable, such as finish, hardness, moisture permeability, wet rub resistance, heat resistance, adhesion, frost resistance, easy construction, etc., which are qualitative breakthroughs and leaps than traditional coatings. The service life of tempered coatings is generally as long as 15 to 20 years, which is far longer than the service life of traditional coatings for about 5 years. The formula of tempered coating is: 30% of ash calcium, 5% of light calcium carbonate, 55% of heavy calcium carbonate, 5% of bentonite, 5% of polyvinyl alcohol, and a few of whitening agents.

Steel coating features

1 Hardened coating with high hardness

It is a kind of material that can increase the hardness of the construction. It has a higher hardness and a higher gloss than the porcelain after construction.

2 effect is good

Good finish (face is looking like porcelain, side view as mirror) Steel coating has a variety of functions, such as pest control, anti-corrosion, radiation protection, anti-ultraviolet radiation, sound and flame retardant, etc., but also the finish of the tempering coating, hardness, moisture permeability, Resistance to wet rub performance, heat resistance, adhesion, frost resistance, etc., a qualitative breakthrough and leap forward than traditional coatings.

3 inexpensive

Tempered paints are cheap and very suitable for use in warehouses or for temporary decoration.

4 long service life

Resistance to scrubbing and scrubbing more than 10,000 times; According to the indicators scientifically estimated finish life of 15-20 years;

5 wide range of use

Can be used for interior wall paint, but also for exterior wall decoration, can also be converted into a variety of decorative colors instead of tiles.

Steel coating formula

The tempered coating is also called imitation ceramic coating. The simple formula is: 30% of ash calcium, 5% of light calcium carbonate, 55% of heavy calcium carbonate, 5% of bentonite, 5% of polyvinyl alcohol, and a few of ultramarine whitening agents.

Water-based tempering coating reference formulation: it contains calcite powder, zinc oxide powder, light calcium carbonate, fly powder, and ash calcium powder, characterized in that it uses a mixed colloidal solution of water-soluble methyl cellulose and ethyl cellulose as a mixed powder. Material solvent.

The main ratios are: calcite powder 20-25 parts zinc powder 5-15 parts light calcium carbonate 15-25 parts, flying powder 20-35 parts, ash calcium powder 15-25 parts, distilled water 70 parts, methyl cellulose 0.6 parts and 0.4 parts of ethyl cellulose.

The water-based imitation ceramic coating formula can be blended with an appropriate amount of titanium dioxide. There is no pungent odor and other harmful substances in the preparation and construction. With the formula ratio, the corresponding content of each raw material contained in each ton can be calculated. I think this Not a problem! Another imitation ceramic coating originally formulated extremely simple, as cellulose depends on your final product needs may be, plus cellulose products have good toughness, easy construction, increase the role of strength, can be added without strict, not strict Delineated!

Tempered paint selection techniques and precautions

The selection of tempered paints should look for environmentally friendly products. Environmental labeling products do not reduce pollution to the environment and can also reduce the damage to construction workers. Also choose to rest assured big brands.

Matters needing attention: 1, construction temperature 0-35 °C, base surface temperature is not less than 5 °C. 2, the material storage should pay attention to moisture, waterproof, prevent direct sunlight. 3, the same gloss, do not allow sag, missing paint. 4, the amount of each ingredient should not be too much, so as not to stand for a long time, resulting in curing. 5, must use special special auxiliary materials, no water, banana water, alcohol, gasoline and so on. 6, in the humidity of 85% or less, the temperature of 0-35 °C is appropriate, do not under the following conditions: rain, snow, fog, frost, high wind, or relative humidity above 85%. 7. After 7 days at room temperature, the coating can be completely cured after 7 days. It is recommended not to use it in advance.

Editor's summary: The above is related to what is the formulation of tempered coating and tempered coating. It is for reference only and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.

coating

palisade material:  high quality steel sheet, hot dipped aluminum-galvanzized steel sheet, cold rolled steel and hot rolled steel

Palisade process:

shape up, hot dipped, powder coated, PVC anti-corrosion treatment

Palisade type:

"D" type and" W" type according to different shape of section

pale thickness: 2.5mm, 3.0mm

pale width: 65mm

Palisade product features: 

high strength, good rigidity, structural stability, anti-corrosion, beautifull appearance, wide vision, low price, various colors, styles and easily install.

Palisade uses:

The palisade used as rotective fence or decorations in buildings, residential sites, industry, agriculture, city govenment, schools, lawn, garden roads and transports.