[China Aluminum Network] To ensure the quality of aluminum profiles, we need to use measurement tools to detect new products. However, if these tools are damaged, there will be no supervisory control over aluminum profiles. Therefore, learn to maintain these measurement tools: Premium Engineered Hardwood Flooring
Premium Engineered Hardwood Flooring
Premium Engineered Hardwood Flooring TECLIC , https://www.teclicfloors.com
1. Do not use grindstone or emery cloth to grind the surface of the gage, the measuring surface and the engraved line. Non-metering maintenance personnel are strictly prohibited from disassembling, refitting, and unauthorized repair of the gage.
2. The storage location of the measuring tool should be kept clean and dry, free from vibration and corrosive gases, and away from places where the temperature changes widely or where there is a magnetic field. The gauges stored in the measuring case should be clean and dry, and no other debris should be stored.
3. When the workpiece surface has burrs, be sure to go to the net burr, and then measure, otherwise it will make the measuring tool wear, and it will also affect the accuracy of the measurement results.
4. Do not touch the measuring surface of the measuring instrument by hand. The sweat and other dirt on the hand will contaminate the measuring surface and cause it to rust. Do not mix the measuring tool with other tools and metal materials to avoid touching the measuring tool.
5. Do not use the caliper tip as a stylus, compass or other tools. Do not twist the two jaws or use the measuring tool as a card.
6. After using the measuring tool, wipe clean the surface stains, aluminum chips, and loosen the fastening device. When it is not used for a long time (more than one month), apply anti-rust oil to the measurement surface. When the gage is not in use, it should be put into a protective box, and it should be used by full-time professionals, and be responsible for the annual audit records that the gage is tested by the authority.